A Guide Xiaomi Redmi Note 13 Pro+ 5G Wireless and Wired Screen Mirroring

In simple words, screen mirroring is an approach to mirror the screens of two devices with one another. For instance, you can mirror your Android phone screen on the computer and the other way round. In this article, viewers will get to know how to mirror an Android screen on PC wirelessly or through a USB cable.

Screen Mirroring is quite useful in many ways. It allows you to display the screen of your Android phone, tablet, or PC on another device through a wired or wireless connection between both devices. In today’s life, not everyone is familiar with screen mirroring technology.

Part 1: What is Screen Mirroring?

Screen Mirroring is such technology that permits you to display your content from your device to another device. In the case of screen mirroring Xiaomi Redmi Note 13 Pro+ 5G PC, this could be done through both wireless and wired connections. At the same time, screen mirroring can be done when one device continuously sends the copy of its screen to another targeted device simultaneously.

In a meeting or presentation, screen mirroring plays an important role by facilitating team members to avoid complex setups and share their screens immediately. Moreover, screen mirroring supports the BYOD model, that is, “Bring Your Own Device.” The reason for supporting this model is to lower the cost and increase efficiency.

Glarysoft File Recovery Pro Annually - Helps to recover your lost file/data, even permanently deleted data.

Part 2: Prerequisites for Android Screen Mirroring

To successfully cast Android screen to PC, the screen mirroring apps should work properly. For this purpose, it is recommended to do some settings on your Android device. The steps of settings for enabling both developer options and USB debugging are discussed below:

Enable Developer option

Step 1: Open the “Settings” app on your Android phone and choose “System” settings from the list. Now click on the “About Phone” option from the top of the screen.

Step 2: Now, you need to scroll down and click the “Build Number” option five times.

Step 3: Proceed back on the “System” settings, where you will find a “Developer” option present.

Enable USB Debugging

Step 1: First, open your Android phone “Settings” and go to “System” settings. Now click on the “Developers” option on the next screen.

Step 2: Now go down and turn on the “USB Debugging” option.

Project Manager - Asset Browser for 3Ds Max

Part 4: Efficient and Fast Wireless Android Screen Mirroring Tool - MirrorGo

If you are looking for an advanced experience of mirroring your Android device with the PC, Wondershare Dr.Fone features an intelligent solution with efficiency. Whether you are presenting your business idea across a large screen or enjoying gaming with your friends, MirrorGo presents a quick and simple solution for mirroring your device with ease.

Wondershare Dr.Fone

Mirror your Xiaomi Redmi Note 13 Pro+ 5G deviceto your computer!

• Utilize the Game Keyboard for mapping the keys across your keyboard to an Android device.
• Easily manage and control your Android phone across the PC with the help of peripherals.
• MirrorGo enables an easy route of transferring files between the PC and Android device.
• Users can record their screens using the tools available on MirrorGo.

4,025,791 people have downloaded it

To understand the simple process of mirroring your Android screen across the PC, you need to follow the steps explained as follows:

Step 1: Download, Install and Launch

Users are requested to download the latest version of MirrorGo from their official website. Once installed, launch the application on the computer.

Step 2: Same Internet Connection

The user needs to ensure that the PC and Android device are connected across the same Wi-Fi connection. Once done, tap on the option of “Mirror Xiaomi Redmi Note 13 Pro+ 5G PC via Wi-Fi” on the lower bottom of the application’s interface.

Step 3: Attach through USB over Unsuccessful Connection

If the user fails to mirror the Xiaomi Redmi Note 13 Pro+ 5G device directly through Wi-Fi, they can connect their Android device with the PC via USB. Before that, it is important to turn on USB Debugging across the Android device for successful connection. Once the phone appears under “Select a device to connect,” you can remove the Android phone from the USB connection.

Step 4: Mirror and Control

Over selecting the Xiaomi Redmi Note 13 Pro+ 5G device for connection, a mirroring platform is established on the PC, and the user can now easily manage and control the Android screen across the PC.

Part 3: Ways to Screen Mirror Android with USB Cable

In this part of the article, we will discuss the most efficient ways to mirror Android screen on PC via USB cable. These ways include efficient applications like Vysor and ApowerMirror. Both of these applications allow a wired USB cable connection between two devices for the purpose of screen mirroring.

3.1 Screen Mirror Android Using Vysor

Vysor is a substitute screen mirror application that helps you to control your Android device through a laptop or PC. By using Vysor, you can play games, project your content in meetings or presentations, share data, etc., through screen mirroring.

Well, the advantages of this screen mirroring application include a bigger screen size, a high-resolution mirror, and no compulsory requirement for root access. It also supports Windows, GNU/LINUX, and macOS. Some of the steps below will show you how to do screen mirroring Xiaomi Redmi Note 13 Pro+ 5G PC or laptop using Vysor.

Step 1: Simply download the Vysor application from your “Google Play Store” application on your Android device.

Step 2: Now, you need to download the Vysor application for your PC or laptop in order to access screen mirroring. Vysor is available for all Mac, Chrome, Windows, and Linux.

Step 3: After complete downloading, you can now connect your Android device with a PC using a USB cable or Micro-USB.

Step 4: After a successful connection, you can now open the “Vysor” app on your Android device to check the basic setup. During the basic setup procedure, you need to turn on the “USB debugging” option. You can find it in the “Developers Options” for the proper working of the Vysor app.

Step 5: You need to allow USB debugging for your PC after opening Vysor. You just have to select “Ok” from the box that appears on the screen of your Android device.

Step 6: You can now see your Android device name on your PC on the Vysor app. You just need to click on the “View” option to see your Android device.

HD Video Converter Factory Pro

3.2 Control Android Screen Using ApowerMirror

ApowerMirror counts as one of the best screen mirroring applications among all the others. This app mainly applies the mainstream mirroring technology that is the reason for its ultimate mirroring experience. You are required to follow some steps that are listed below to cast Android screen to PC via ApowerMirror:

Step 1: Open your Android device “Settings” app and scroll down at the bottom of the page to see the settings of “Developer options.” Now further check the option of “USB debugging” and turn it on.

Step 2: In this step, you need to download ApowerMirror on your PC and install its setup. Now open the app from the Desktop.

Step 3: Now, use a USB cable to connect your Android device with your PC. After that, check the notification that appears on your Android device. Begin the mirroring process by clicking on the “Start Now” option in that notification.

NeoDownloader - Fast and fully automatic image/video/music downloader.

Step 4: At last, you can now entertain yourself on a much bigger screen by controlling your Android device.

Final Words

This article covers everything about screen mirroring and its working with the need to cast Android screen to PC. We have discussed the concept of screen mirroring both by wired or wireless connection. With the help of this article, you can now share your Android screen on a laptop or PC and can share data like documents, images, games, etc.

Furthermore, Wondershare introduces us to software like MirrorGo. It helps us to build a wireless connection between devices that we want to connect for screen mirroring purposes.

How Xiaomi Redmi Note 13 Pro+ 5G Mirror Screen to PC?

Mirror Screening has been devised as one of the most exquisite and simplest features in sharing data that provides you with the ability to share your smaller screens onto larger ones for people to observe the information presented easily. Many mirror screening applications have been introduced and have been brought on the front to filter out the best in the market; however, the method involving sharing the screen to the PC or other associated devices have been recognized as quite simple and effective in performance. This article provides Xiaomi Redmi Note 13 Pro+ 5G users, in specific, a list of solutions that can act as the easiest and the most convenient in allowing them to share their screen with a PC.

Part 1: Why Need Screen Mirroring?

If we consider the traditional and conventional methods of connecting AV cables, HDMI’s, or VGA adapters for connecting smaller screened devices to larger screens, these methods present too much work and a series of protocols that potentially outdated the system completely. In the environment that we survive in, it is significant for us to understand that presenters keep their data intact on their smartphones and have it efficiently shared among his colleagues before the discussion. The wireless screen technology enables presenters to pose such a system into power, which not only increases the mobility but the efficiency of the system too without any unnecessary delays in connecting the Xiaomi Redmi Note 13 Pro+ 5G device with a larger platform. Screen mirroring can be set as the most optimal solution to such issues, which would not only allow you to enjoy presenting but save a lot of effort before developing the frame of presentation.

Part 2: How to Mirror Android to PC Wirelessly?

Screen mirroring can be covered through wired and wireless connections. If you are willing to work on a wireless solution, there are several options to come by. In this part, we will be analyzing the multiple options that can be used for Xiaomi Redmi Note 13 Pro+ 5G mirroring to a PC.*

1. Xiaomi Redmi Note 13 Pro+ 5G View in Xiaomi Redmi Note 13 Pro+ 5G Flow

Xiaomi Redmi Note 13 Pro+ 5G Flow is known for providing multiple device solutions for Xiaomi Redmi Note 13 Pro+ 5G smartphone users. For people who are searching for an option to perform screen mirroring on their PC, they can try this official approach of mirroring Xiaomi Redmi Note 13 Pro+ 5G devices to their PC.

With the option of providing seamless access to Xiaomi Redmi Note 13 Pro+ 5G users, the Xiaomi Redmi Note 13 Pro+ 5G View function gives a perfect system of mirroring the Xiaomi Redmi Note 13 Pro+ 5G device in no time. To know how Xiaomi Redmi Note 13 Pro+ 5G View in Xiaomi Redmi Note 13 Pro+ 5G Flow helps in Xiaomi Redmi Note 13 Pro+ 5G mirroring to PC,* you must look into the following steps:

Step 1: You must start by downloading and installing the Xiaomi Redmi Note 13 Pro+ 5G Flow application on your computer and Xiaomi Redmi Note 13 Pro+ 5G smartphone. Before launching the application for mirroring the Xiaomi Redmi Note 13 Pro+ 5G device to a PC, you must ensure that the Xiaomi Redmi Note 13 Pro+ 5G devices are connected to the same Wi-Fi.

Step 2: Following this, you must go through the PC version of Xiaomi Redmi Note 13 Pro+ 5G Flow and find your phone name to generate the credentials to connect the Xiaomi Redmi Note 13 Pro+ 5G device to the PC. This pairing process will generate a passcode that needs to be entered into the phone to initiate a connection.


Step 3: As the pairing process succeeds, you can click on the “Smart View” button on the PC to mirror the Xiaomi Redmi Note 13 Pro+ 5G to your PC.


2. Wondershare Dr.Fone Air – Online Screen Mirror

For a better user experience, Wondershare Dr.Fone Air provides an online, wireless screen mirroring experience with no specific requirements of user efforts. This tool features a simple environment for putting up a Xiaomi Redmi Note 13 Pro+ 5G device for screen mirroring on the PC. Along with diverse compatibility, this tool provides a quick solution with the option of saving time and cost for the user. There are many pointers that make Wondershare Dr.Fone Air a provocative solution to work with, which are featured as follows:

• You are not required to connect your Xiaomi Redmi Note 13 Pro+ 5Gs through Bluetooth and NFC.
• There are no ads covering the tool, avoiding all sorts of damage to the user experience.
• It allows you to adjust the mirrored screen by rotating, zooming, and taking screenshots.

We will now shift towards mirroring the Xiaomi Redmi Note 13 Pro+ 5G screen to the PC with the help of Wondershare Dr.Fone Air. For that, we will use the following steps as help:

Step 1: Launch Dr.Fone Air and Connect to Wi-Fi

You must open the Dr.Fone Air platform on the web browser of your PC. Continue with connecting the Xiaomi Redmi Note 13 Pro+ 5G and computer with the same Wi-Fi connection.

Step 2: Scan or Add Code for Connection

Following this, you must install the Dr.Fone Link on your device and continue connecting both devices. You can make use of the QR code or cast code for connecting both devices.

Step 3: Mirror Xiaomi Redmi Note 13 Pro+ 5G Device to PC

On scanning the code, the Xiaomi Redmi Note 13 Pro+ 5G devices connect with each other, and the Xiaomi Redmi Note 13 Pro+ 5G screen successfully mirrors the PC.

3. Connect App on Windows

Windows devices come with another great option of screen mirroring a device onto the screen without requiring downloading any tool. This feature was made available on Windows 10 devices and continues to provide users with a quick solution to Xiaomi Redmi Note 13 Pro+ 5G screen mirroring to PC.* The Connect App can be considered to connect your Xiaomi Redmi Note 13 Pro+ 5G device with the PC by following a set of steps, which are discussed as follows:

Step 1: You need to access the “Action Center” on the bottom-right of the screen and proceed to activate “Bluetooth” from the available options. Afterward, select the “Connect” option.


Step 2: Afterward, open the “Quick Menu” of your Xiaomi Redmi Note 13 Pro+ 5G device and enable the option of “Smart View.” You will see all the available options on your Xiaomi Redmi Note 13 Pro+ 5G screen with whom you can create a connection. Select your device from the list and press the “Start Now” button to start the mirroring process.


Step 3: Following this, you will receive a confirmation pop-up notification on your PC. You have to hit the “OK” button to mirror your Xiaomi Redmi Note 13 Pro+ 5G phone to your PC successfully.

The Tube Sites Submitter is a fast and efficient tool for anyone who needs to upload videos quickly, easily and automatically to hundreds of tube sites in mere minutes .


4. Mirror Xiaomi Redmi Note 13 Pro+ 5G Phone to PC with MirrorGo

There is no bigger brand for Android phones than Xiaomi Redmi Note 13 Pro+ 5G. The phones are loaded with features that offer users convenience, such as fast charging. You can also mirror your Xiaomi Redmi Note 13 Pro+ 5G phone to the PC with the help of MirrorGo by Wondershare.

The tool is accessible from Windows and works well with every known model of Xiaomi Redmi Note 13 Pro+ 5G Android phones. If you wish to transfer files, play games, or watch movies from phone to PC, then MirrorGo will enable everything for you. The simplistic and fast interface of the software allows you to complete the task at hand quickly.

Wondershare Dr.Fone

Mirror your Xiaomi Redmi Note 13 Pro+ 5G deviceto your computer!

• Play mobile games on the big screen of the PC with MirrorGo.
• Store screenshots taken from the phone to the PC.
• View multiple notifications simultaneously without picking up your phone.
• Use android apps on your PC for a full-screen experience.

4,783,042 people have downloaded it

The steps to mirror the Xiaomi Redmi Note 13 Pro+ 5G device using MirrorGo from PC are listed follows:

Step 1: Access MirrorGo

The first step is to download the software on your PC. Run the app after installing it. Make sure the Xiaomi Redmi Note 13 Pro+ 5G phone is connected to the PC, and the File Transfer option is enabled from the phone’s USB settings.

Step 2: Enable USB Debugging and Developer Mode

Tap on the About Phone button from Settings and tap on Build Number 7 times to activate the Developer Mode. Go to Additional Settings and check the Debugging Mode option. Tap on OK to finalize the procedure.

Step 3: Mirror the Xiaomi Redmi Note 13 Pro+ 5G Phone using MirrorGo

Now, look over to the MirrorGo’s interface, and you will see the main screen of your Xiaomi Redmi Note 13 Pro+ 5G device there. The mirroring will be enabled on the Xiaomi Redmi Note 13 Pro+ 5G device.

Greeting Card Builder

Part 3: How to Mirror Android to PC without Root via USB

While there are many wireless solutions that you can come across for mirroring your Android device to the PC, you can also try using the wired methods. If you are not finding the right platform to establish a wireless connection, you will have to mirror the Android device to the PC through a USB connection. There are many options available, out of which we have highlighted the following tools for you:

1. AirDroid Cast

AirDroid Cast is a renowned method available for users who seek to mirror their Android device to their PC through a USB connection. The tool is majorly focused on providing casting solutions to users who seek to put their devices’ display on a bigger screen. While the tool establishes a strong connection, it offers powerful casting support. Although the process takes a while to conclude, it can still be considered a great option if you are looking to Xiaomi Redmi Note 13 Pro+ 5G cast to a PC* through a USB connection. Look into the following steps to know how you can use AirDroid Cast for this purpose:

Step 1: You must download and install AirDroid Cast on your computer and proceed to launch it. Redirect to the “USB” section from the top and connect your Android to the PC through a cable connection.

Step 2: In the “Available Device” list, select the Xiaomi Redmi Note 13 Pro+ 5G device you want to cast.


Step 3: You might have to enable USB debugging on your Xiaomi Redmi Note 13 Pro+ 5G device. For this, access “Settings” and look for the “About phone” option. Proceed into the “Software information” section and look for “Build number” on the next screen. Tap it seven times until you become a developer, which will allow you to enable USB debugging.

PaperScan Professional： PaperScan Scanner Software is a powerful TWAIN & WIA scanning application centered on one idea: making document acquisition an unparalleled easy task for anyone.


Step 4: Redirect into the “Settings” of your Xiaomi Redmi Note 13 Pro+ 5G device and find the “Developer options.” Look for the “USB Debugging” option on the next screen and turn on the toggle. As the process is concluded successfully, the Xiaomi Redmi Note 13 Pro+ 5G screen is cast onto the PC.

Any DRM Removal for Win：Remove DRM from Adobe, Kindle, Sony eReader, Kobo, etc, read your ebooks anywhere.


2. Vysor

If you are looking to mirror your Xiaomi Redmi Note 13 Pro+ 5G screen to the PC with another option, Vysor is a good option to work with without rooting your device. This process requires you to utilize the USB connection for establishing the screen mirroring environment. Following this, Vysor provides a diversity of options to set, which acts as the parameters of the final product being obtained. Let’s look at how you can screen mirror your Xiaomi Redmi Note 13 Pro+ 5G device on Vysor:

Step 1: Download and install Vysor on your Windows computer and continue to launch it. As it opens on the new window, proceed to initialize the settings.

Step 2: You must connect your Google account with Vysor if required. Checkmark the options of “International Keyboard” and “Share All Devices” to mirror the Xiaomi Redmi Note 13 Pro+ 5G on your PC.

Forex Robotron Basic Package


Step 3: As you connect your Xiaomi Redmi Note 13 Pro+ 5G to the PC through a wire, ensure that USB debugging is enabled for the Xiaomi Redmi Note 13 Pro+ 5G device. If it is enabled, it will be automatically detected by Vysor. Continue clicking on the “View” button to observe the mirroring results on your PC.


Epubor Ultimate for Mac:Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

Conclusion

This article has provided a comprehensive overview of how one can mirror their Xiaomi Redmi Note 13 Pro+ 5G device with the right set of methods. As you have the option of adopting both wireless and wired methods, this article helps you out in making proper decisions. Wondershare Dr.Fone Air provides one of the simplest options for mirroring the Xiaomi Redmi Note 13 Pro+ 5G device to the PC in no time. Try this free wireless option for the perfect Xiaomi Redmi Note 13 Pro+ 5G screen mirroring to a PC.*

How to Cast Xiaomi Redmi Note 13 Pro+ 5G to Computer for iPhone and Android?

Screen Mirroring is a very common feature that is being adopted by many users as a cheap alternative to big, large screens. People have been managing to mirror their smartphone onto the screen of their PCs for viewing the content present on their phone with more detailing and precision. At times, people find the need to enjoy the contents present on their phones with their family, leading to the requirement of bigger screens. This article discusses various screencasting software providing the services to cast your Android or iPhones to PC that would help you in deciding what and how to use a specific software effortlessly.

When you can’t mirror phone to computer, view the guide of how to mirror Android to PC and how to mirror iPhone to PC.

Part 1: Cast Contents of iPhone and Android to Computer with MirrorGo

Sometimes the smaller Android or iPhone screen isn’t enough to accurately manage the app or files available on the Xiaomi Redmi Note 13 Pro+ 5G device. Under such circumstances, the best solution is to cast Xiaomi Redmi Note 13 Pro+ 5G to PC using a mirroring application.

Wondershare Dr.Fone is the safest option to perform such an activity, no matter the phone’s platform is Android or iOS. The app offers you to display your phone’s games, videos, and similar files to the much larger computer screen, where it is easy to complete the task at hand.

Step 1: Download MirrorGo and Connect the Phone with PC

MirrorGo is available for Windows PC. Download the application and launch it on the Xiaomi Redmi Note 13 Pro+ 5G device. You will need to connect the Android phone with a USB cable. On the other hand, the iOS device needs to be connected to the same Wi-Fi network as the PC.

Step 2: Log in with Same credentials

To enable casting with an Android device, you need to tap on the Developer Option 7 times under the About Phone button. After that, navigate to Additional Settings, where you need to toggle-on USB Debugging.

If you are using an iPhone, simply locate the Screen Mirroring option. After the scan, tap on MirrorGo before proceeding to Step 3.

Power Tools add-on for Google Sheets, Lifetime subscription

Step 3: Cast the Phone to Computer

Lastly, reaccess MirrorGo from the computer, and you’ll see the screen of the connected Android or iOS device.

Part 2: How to Cast Xiaomi Redmi Note 13 Pro+ 5G to PC with AirDroid?

If we get started on the list of mirroring software that provides explicit services to its users, AirDroid can be considered as a frontline software for Android users for mirroring their screen on PC wirelessly. AirDroid provides a detailed feature set in the form of file transfer options, controlling your phone via computer and screen mirroring your phone to the PC with convenience. AirDroid is available for its users in the form of a desktop app and website. If you look forward to efficiently consume the platform in the form of the desktop application, you need to follow the step-by-step guide as provided below to control your Android phone from PC successfully.

Step 1: Download Application on both devices

Before using the services of the application, it is significant to install the desktop application from their official website and download the mobile application onto your Android phone through Google Play Store.

Step 2: Log in with Same credentials

For effectively mirroring your phone onto the PC screen, you are required to log in both platforms with the same username.

Step 3: Access the Appropriate Option

Select the “Screen Mirroring” button present on the window after you access the “Remote Control” tab on the sidebar of the platform. The screen is now mirrored onto the PC and can be viewed with ease.

SwifDoo PDF 2-Year Plan

Part 3: How to Cast Xiaomi Redmi Note 13 Pro+ 5G to PC by Reflector 3?

Reflector 3 is another appreciable platform that provides you with screening services for both the Android and iPhone users. While understanding the basic differences in approaching the right options to cast your phone to PC, this article states the guideline for utilizing the services of Reflector 3 for both Android and iPhone separately.

For Android Users

Step 1: Download and Install

You need to download and install the application on your devices and have them connected to the same internet service provider. Launch the application to initiate the process.

Step 2: Open Settings on Phone

Following this, turn on your phone and slide down the finger to open the Quick settings section.

Step 3: Select the Casting Options

You need to turn on the casting option on the phone, which is either available under the name of Cast or Smart View.

Step 4: Select the Computer

A screen will open in front of you, consisting of the list of devices that can be wireless receivers of your screen. Tap the appropriate option to cast your phone onto the screen.

For iOS Users

Conversely, it is important to understand that with similar outcomes, there are different patterns of steps that are to be followed to screen your iPhone with the PC. For that, take a look at the guide provided as follows.

Step 1: Download and Launch

Download the software on both devices. Following, you need to confirm whether they are connected over the same internet connection. Then you can launch the program.

Step 2: Access Control Center

Now using your iPhone, swipe up to open the Control Center. Select the option of Screen Mirroring.

Step 3: Select the Appropriate Screen

With a list of Airplay-enabled receivers on the front, you have to tap on the right option to conclude the procedure of streaming or screening video from the phone to the computer.

vMix 4K - Software based live production. vMix 4K includes everything in vMix HD plus 4K support, PTZ control, External/Fullscreen output, 4 Virtual Outputs, 1 Replay, 4 vMix Call, and 2 Recorders.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Part 4: How to Cast Xiaomi Redmi Note 13 Pro+ 5G to Computer by LetsView?

LetsView is another compelling and attractive platform that provides you the state-of-the-art environment for screen mirroring your phone to computer. This platform is available both on Google Play Store and App Store, making it an easy option for any kind of smartphone users.

For Android

To understand the method of screening your Android phone onto a PC screen, you need to follow the step-by-step guide provided below.

Step 1: Download and Launch

Ensure that the applications are downloaded on both applications, and both devices are connected with the same Wi-Fi.

Step 2: Detect your PC

While using LetsView on your phone, you need to detect your PC where you wish to mirror your screen and select it.

Step 3: Select the Appropriate Option

You’ll be led to another screen containing two options to select from. Since our objective is to mirror the screen of our Android phone to the computer, you need to select the option stating, Phone Screen Mirroring.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

For iOS

Step 1: Download and Connect

You need to download the applications on both devices. Along with that, you need to make sure that both devices have the same internet connections.

Step 2: Open Application and Detect PC

Following this, open the LetsView application on your iPhone and detect the PC by tapping on the “Redetect” button. Tap on the appropriate computer name.

Step 3: Mirror your Phone

This opens up another screen where you need to select the option quoting Phone Screen Mirroring to connect the phone to the computer screen.

SwifDoo PDF Perpetual (1 PC) Free upgrade. No monthly fees ever.

Part 5: How to Mirror Phone to Computer with Dr.Fone Air

While you have looked into some great solutions to cast your phone to a PC, there is another tool that provides a similar experience in mirroring the screen of your phone onto a computer screen. Wondershare Dr.Fone Air is a great online tool designed for mirroring the phone’s screen onto the computer for free. While it is a quick solution to work with, Wondershare Dr.Fone Air features some great functionalities which make it a unique tool:

• You can easily adjust the mirrored screen by zooming in and out, taking screenshots, and rotating it.
• You are not required to use Bluetooth and NFC for connecting devices in the process.
• It is a simple and quick process to screen mirror devices onto another screen.

Screen Casting vs. Screen Mirroring: What’s the Difference?

You might have heard of screencasting and screen mirroring together many times. It may come as a surprise to you that these two terminologies hold considerable differences from each other. To simplify the difference, screencasting is performed with the motive of displaying the content of the screen on another output display in the same room.

For screen mirroring, you display the content of the screen on another display while showing all the movements of the screen. Screen mirroring gives you the leverage to use the smartphone without any interruption.

How to Use Dr.Fone Air to Mirror Phone to Computer

If you are looking forward to mirroring your phone screen to a PC using Dr.Fone Air, you must use the following steps:

Step 1: Access the Dr.Fone Air Tool

Open the official website of Wondershare Dr.Fone Air and proceed to connect your phone and PC to the same Wi-Fi connection.

Step 2: Choose the Option for Connecting

As you connect these devices, proceed to install Dr.Fone Link on your phone. Once done, you will have to use the QR code or cast code displayed on the browser screen on your computer.

Step 3: Screen Mirrored Successfully

This will successfully execute the process and mirror the screen of your phone with the computer.

Conclusion

This article has provided a diversity of solutions for screencasting your phone to the computer. With the help of these solutions, you can quickly cast your phone to a PC without making it difficult for you. However, if you wish to have a better experience with screen mirroring your phone to a PC, you can consider using Wondershare Dr.Fone Air for effective results. This online solution won’t disappoint in providing a proper screen mirroring solution for your phone.