How Can Lava Blaze 2 ProMirror Share to PC?

It usually happens with you during an office presentation or a task where you encounter with such an important video or detail that you find effective to be discussed or shown among your colleagues. At such stages, there are no properly designed cheap tools available that would help you cast the screen from your phone onto a bigger screen, allowing people to have a good look over the screen and develop their analysis out of it. Screen Mirroring has provided an ultimate solution to such needs and presented impressive and simple platforms that would allow you to mirror your device onto a bigger screen. Lava Blaze 2 Prophones are counted among the most commonly used Android devices where people have complained about the availability of the screen sharing feature for displaying its screen onto massive ones for people to have a wider view of the objectives presented. This article discusses different mechanisms that allow you to mirror Lava Blaze 2 Proto PC through a variety of methods involving different functions of the phone.

Glarysoft File Recovery Pro Annually - Helps to recover your lost file/data, even permanently deleted data.

Part 1: Lava Blaze 2 ProMirror Share to PC using Lava Blaze 2 Pro’s Multi-Screen

Lava Blaze 2 Prohas recognized the significance of the feature and has devised its mechanism by providing the screen mirroring capability on its phone. This built-in feature makes it quite easier for you to share Lava Blaze 2 Pro’s screen to PC. The mirroring feature offered by Lava Blaze 2 Procan be countered in a few easy steps that are quite not strenuous to understand. To get ahold of Lava Blaze 2 Pro’s mirror sharing feature to PC, follow the steps provided below.

Step 1: Open Connections from Computer

It is necessary to have your devices attached for screen mirroring through a single Wi-Fi connection. After connecting your PC and Lava Blaze 2 Prousing the same Wi-Fi source, access the Notification Center of your PC by tapping on the bottom right button to lead to a new screen. Tap on “Connect” from the list of options under the Collapse section.

Step 2: Access Your Lava Blaze 2 Pro

Following this, you need to select the option of mirroring Lava Blaze 2 Proscreen to PC by accessing the Notification bar from the top of the phone. From the series of a different prompt button, you need to select “Wireless Projection” to mirror Lava Blaze 2 Proto PC.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ 

Step 3: Selecting the Computer

A new window opens on the front of the screen. It will consist of the Lava Blaze 2 Pro devices that are available on the same Wi-Fi connection to get shared. After selecting the appropriate computer, you can conclude the procedure since anything opened on the screen can now be observed on the PC as well.

EaseText Audio to Text Converter for Windows (Personal Edition) - An intelligent tool to transcribe & convert audio to text freely

Part 2: MirrorGo: The Best Mirroring Application

If you are up for searching other options to mirror share Lava Blaze 2 Proto PC, there are many other platforms that may provide you effective mirroring services. However, while understanding the saturation that exists in the market, this article intends to provide you with a perfect platform for mirror sharing your Lava Blaze 2 Proto PC with ease.

Wondershare Dr.Fone offers the best results with HD resolution for a better experience over a big screen. This application intends to develop a controlled environment over the computer for the user, as compared to other platforms that desperately fail to offer a controlled foundation in screen mirroring. MirrorGo looks over a vast window of practical applications, for which it consists of tools that have a use apart from screen mirroring. MirrorGo offers you to record your mirrored device screen, take a screenshot of an important frame, or even have it shared across different viewing platforms. This platform seeks to induce a better approach to mirroring your Lava Blaze 2 Proto PC as compared to the other software existing in the market. To understand the simple guide on how to efficiently utilize the platform, you need to look over the steps adjourned below.

Wondershare Dr.Fone

Mirror your Lava Blaze 2 Pro deviceto your computer!

• Share Lava Blaze 2 Proscreen to computer.
• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.
• Share secret moves and teach next level play.

4,227,666 people have downloaded it

Step 1: Connecting your PC

It is important to have your PC attached to the specific Lava Blaze 2 Prodevice that you wish to mirror onto it. For this, you can consume a USB cable to successfully establish a connection.

Step 2: Accessing Settings

Following this, you need to access the settings of you Lava Blaze 2 Proto open the “System & Updates” section. Click on the “Developer Options”. Then enable USB Debugging with the toggle available on the window.

Step 3: Mirror your Device

After successfully enabling USB Debugging, a pop-up appears on the Lava Blaze 2 Prodevice, asking for an establishment of a mirroring environment. Tap “Ok” to successfully mirror your device across the PC.

Part 3: Lava Blaze 2 ProMirror Share to PC wirelessly via AllCast

Mirroring Android Devices has been made easier with a very definitive and expansive device of AllCast where you can share your Lava Blaze 2 Proscreen to PC by following a few steps, as stated below.

Step 1: Download Applications on both devices

You need to have the AllCast application on both your PC and Lava Blaze 2 Prophones for connecting them, and mirrors share your screen to the PC.

Step 2: Open Computer Receiver

After ensuring that the PC, as well as the mobile phone, are connected over the same Wi-Fi device, you need to initiate the process by opening the AllCast Receiver through the Chrome Application Launcher.

Step 3: Initiate Mirror Share

After getting the appropriate settings on the computer, you need to propagate towards the phone. Initiate ‘Screen Recording and Mirror’ on the Lava Blaze 2 Pro.

Step 4: Synchronize Devices

In the options presented by “Screen Recording and Mirror,” you need to access the “Network Devices” and select the appropriate desktop model. Selecting the model will start screen sharing with ‘Chrome @’ followed by the IP Address of the computer. This allows you to mirror your Lava Blaze 2 Proscreen to PC wirelessly through AllCast without difficulty.

Conclusion

This article has introduced several screens mirroring platforms that can be used to mirror share Lava Blaze 2 Proto PC. The perfect adoption of such issues will surely lead you to understand the system more appropriately and develop a ground where you present an effective change through this function.

Nero Burning ROM:
The ultimate burning program for all your needs!

How to Screen Mirroring Lava Blaze 2 Pro to PC?

Suppose we consider a situation where you are sitting in a presentation. You discover a major factor that is to be addressed and explained to your colleagues for developing a point, primarily, and have them moved over the point. It would get extremely difficult for you to show your smartphone’s screen to the people sitting there all at once. For avoiding certain disciplinary and time losses, you require the screen to be mirrored to something bigger and wider for everyone to see in the room. This article considers different mechanisms adapted to mirror your Lava Blaze 2 Pro and other Android smartphones to PC.

Part 1: Screen Mirroring Lava Blaze 2 Pro to PC via Wi-Fi – Dr.Fone Air

There are many screen mirroring facilities you might come across in the market. Considering the functionality being dealt with, efficiency is a major requirement for many users. Wondershare Dr.Fone Air is an online solution providing screen mirroring Lava Blaze 2 Pro services to people under a simple operation. If you are looking for a quick solution to mirror your Lava Blaze 2 Pro phone to a PC, this tool is a great thing to consider.

You can wirelessly connect your smartphone to the PC’s web browser without paying any price associated with the services. Dr.Fone Air does not disappoint you with the effective Lava Blaze 2 Pro screen mirroring that it flexibly executes. To know more about this professional tool for presenting your Lava Blaze 2 Pro screen on a PC, you must look into these features:

• This mirroring solution is free to use and has no associated ads attached throughout, which does not hinder your mirroring experience.
• It does not require you to access Bluetooth, NFC, or other services to connect with the computer.
• You can have a flexible phone screen control for adjusting the screen in the best way possible.

Steps to Mirror Your Lava Blaze 2 Pro to PC using Dr.Fone Air

We will now look into how to wireless display Lava Blaze 2 Pro devices on the computer with this mirroring solution, which will be covered through a Wi-Fi connection:

Step 1: Open Dr.Fone Air on Browser

You must launch any browser on your computer and open the official link of Dr.Fone Air to initiate the process. Ensure that the PC and Lava Blaze 2 Pro devices are connected to the same Wi-Fi network.

Step 2: Connect Lava Blaze 2 Pro through Available Codes

Install the Dr.Fone Link application on your Lava Blaze 2 Pro device and scan the QR code displayed on the screen. You can also use the cast code provided below the QR code to connect the Lava Blaze 2 Pro devices.

Step 3: Successfully Mirror Lava Blaze 2 Pro with PC

As the Lava Blaze 2 Pro devices are connected, Xiaomi’s screen is displayed on the computer, which shows that the mirroring is completed.

Part 2: Screen Mirroring Lava Blaze 2 Pro to PC with MirrorGo

There might be many ways that can help you implement screen mirroring over your PC; however, the question comes over the quality of the approach that is being undertaken. While realizing the variety of mechanisms that can be consumed to screencast your Android to PC, there is another approach that offers the most unique and coherent interface to work on. Wondershare Dr.Fone outsmarts the other existing platforms and offers a user experience that enhances the dynamics of screencasting. Following an HD result in the display, MirrorGo officially settles itself as a perfect mechanism for exempting tired eyes while playing over the Android smartphone. Following the mirroring features offered at MirrorGo, it regards itself as a screen recorder and a screen capturer. This leads you to a more expansive utility as compared to other existing mirroring solutions. Another aspect that makes MirrorGo the perfect option is the synchronization feature that allows you to stay put with the data across your Android smartphone. Sharing your Lava Blaze 2 Pro to PC is a very simple procedure with MirrorGo, which can be understood from the guide provided as follows.

Wondershare Dr.Fone

Mirror your Lava Blaze 2 Pro deviceto your computer!

• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard, including SMS, WhatsApp, Facebook, etc.
• View multiple notifications simultaneously without picking up your phone.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.
• Share secret moves and teach the next-level play.

4,958,941 people have downloaded it

Step 1: Connecting your Computer with the Phone

You need to attach your Lava Blaze 2 Pro with the PC through a USB Cable. Following the connection, you need to tap on the option of “Transfer Files” provided in the prompt message.

Step 2: USB Debugging

Following a successful establishment of a connection with the computer, you need to access the Settings of your Lava Blaze 2 Pro and lead towards the System & Updates section in the list. Following this, you need to tap on the Developer Option to lead towards the next window containing the option of USB Debugging. Enable the settings with the available toggle.

Step 3: Establish Mirroring

A prompt message appears on the screen for the establishment of the connection. Tap “Ok” to successfully attenuate your Android with the PC.

Step 4: Mirroring is done.

Now you can see your Lava Blaze 2 Pro phone screen on the computer screen.

Part 3: Screen Mirroring Lava Blaze 2 Pro to PC via USB – Scrcpy

You can utilize another conventional mechanism of screen mirroring your Lava Blaze 2 Pro to PC using the Phone’s Scrcpy. Initially, you need its extension file on your computer, which can be downloaded from the Internet with ease.

Step 1: Extract and Launch

After downloading the archive folder of Scrcpy on your computer, you need to extract the files and launch the .exe file. However, it is important to connect your Android phone with the PC to avoid prompt errors.

Step 2: Enable USB Debugging on your Phone

You need to open the Settings on your phone and access its About Phone section. If your Developer Options are not enabled, you need to tap on the build number present on the screen multiple times, followed by opening the screen and selecting the option of USB Debugging from the list to have it enabled.

Step 3: Run Scrcpy File

After enabling the USB Debugging mode, you need to re-launch the .exe file on your computer and allow all the prompt messages received on your phone. This will conclusively mirror your Lava Blaze 2 Pro screen to PC without any discrepancies. However, it should be kept in mind that the process elapses as soon as you detach your phone from the USB connection.

Part 4: Screen Mirroring Lava Blaze 2 Pro to PC Wirelessly – Vysor

Vysor has presented itself as a very strong screen mirroring application for Android phones such as Xiaomi. It provides a USB and ADB connection to its users who wish to mirror Lava Blaze 2 Pro to PC using Vysor. This application might be referred to as the best in the market; however, it still presents a very peculiar drawback for many of its consumers. Many people have reported a high drainage rate of their phone’s battery over using Vysor for screen mirroring through a USB connection. This article looks forward to presenting you with the usage of ADB connection in screen sharing Lava Blaze 2 Pro to your PC.

Step 1: Initiate USB Debugging on your Phone

You need to have USB debugging enabled on your phone to connect your Lava Blaze 2 Pro through the ADB connection. If it is not automatically enabled, you need to simply approach the Settings of your phone and open About Phone. You need to open your Developer Options or have them enabled if never done before by tapping on the build number multiple times before enabling the option of USB debugging inside the Developer options.

Step 2: Open Command Prompt on PC

Turn on the Command Prompt on your PC to initiate an ADB command terminal. For that, you need to type in ‘adb tcpip 5556’ to restart ADB in TCPIP mode.

Step 3: Locate your IP Address

Following this, you need to locate the IP address of your Xiaomi. If you have a phone with an OS version below 6.0, type in:

Adb shell

Netcfg

Conversely, for phones greater than Android 7, sulk in:

Adb shell

ifconfig

A list shall appear on the Command Prompt, showing a list of all the local IP addresses associated with the computer. You need to locate the IP address of your Lava Blaze 2 Pro Android phone and have it copied on the clipboard.

Step 4: Close and Re-Type IP Address

You need to exit the ADB window to re-type the IP address for connecting your PC with the phone. Type ‘ADB shell’ to exit the window; however, keep the terminal open. Retype the IP address on the screen.

Step 5: Remove USB Cable and Confirm Connection

Following this, you need to remove the USB cable and continue using your phone using the ADB connection through the Wi-Fi and Hotspot connection of your phone. To confirm, you can check the Lava Blaze 2 Pro device connected through Vysor to observe it active on the list. You can simply connect to the phone in a normal manner for screen mirroring Lava Blaze 2 Pro to PC.

Part 5: Screen Mirroring Lava Blaze 2 Pro to PC with Mi PC Suite

Step 1: Download Mi PC Suite

To successfully screen share your Lava Blaze 2 Pro to PC, you can access the official website of Mi PC Suite to have it downloaded on the PC.

Step 2: Launch the PC Suite

After downloading the application, you need to simply launch it and observe the screen on the front showing the option of Connect your Device. You need to attach your Lava Blaze 2 Pro phone to your PC using USB Cable.

Step 3: Enable Screencast After Successful Connection

Your phone might take a while to install the drivers for connecting to the PC. After the successful installation of drivers, the details of the phone appear on the screen on the front. You simply need to select the option of Screencast present on the bottom of the phone in the PC Suite. This lodges your screen onto the PC successfully.

Conclusion

This article has featured a list of different screen mirroring solutions you can use on your Lava Blaze 2 Pro device. If you are looking for an effective Mi screen mirroring on a PC, you can use tools like Dr.Fone Air to mirror smartphones effectively without taking considerable time. The provided solutions are among the best options, saving you time and effort in connecting devices successfully.

A Guide Lava Blaze 2 Pro Wireless and Wired Screen Mirroring

In simple words, screen mirroring is an approach to mirror the screens of two devices with one another. For instance, you can mirror your Android phone screen on the computer and the other way round. In this article, viewers will get to know how to mirror an Android screen on PC wirelessly or through a USB cable.

Screen Mirroring is quite useful in many ways. It allows you to display the screen of your Android phone, tablet, or PC on another device through a wired or wireless connection between both devices. In today’s life, not everyone is familiar with screen mirroring technology.

Part 1: What is Screen Mirroring?

Screen Mirroring is such technology that permits you to display your content from your device to another device. In the case of screen mirroring Lava Blaze 2 Pro PC, this could be done through both wireless and wired connections. At the same time, screen mirroring can be done when one device continuously sends the copy of its screen to another targeted device simultaneously.

In a meeting or presentation, screen mirroring plays an important role by facilitating team members to avoid complex setups and share their screens immediately. Moreover, screen mirroring supports the BYOD model, that is, “Bring Your Own Device.” The reason for supporting this model is to lower the cost and increase efficiency.

Part 2: Prerequisites for Android Screen Mirroring

To successfully cast Android screen to PC, the screen mirroring apps should work properly. For this purpose, it is recommended to do some settings on your Android device. The steps of settings for enabling both developer options and USB debugging are discussed below:

Enable Developer option

Step 1: Open the “Settings” app on your Android phone and choose “System” settings from the list. Now click on the “About Phone” option from the top of the screen.

Step 2: Now, you need to scroll down and click the “Build Number” option five times.

Step 3: Proceed back on the “System” settings, where you will find a “Developer” option present.

Enable USB Debugging

Step 1: First, open your Android phone “Settings” and go to “System” settings. Now click on the “Developers” option on the next screen.

Step 2: Now go down and turn on the “USB Debugging” option.

Forex Robotron Gold Package

Part 4: Efficient and Fast Wireless Android Screen Mirroring Tool - MirrorGo

If you are looking for an advanced experience of mirroring your Android device with the PC, Wondershare Dr.Fone features an intelligent solution with efficiency. Whether you are presenting your business idea across a large screen or enjoying gaming with your friends, MirrorGo presents a quick and simple solution for mirroring your device with ease.

Wondershare Dr.Fone

Mirror your Lava Blaze 2 Pro deviceto your computer!

• Utilize the Game Keyboard for mapping the keys across your keyboard to an Android device.
• Easily manage and control your Android phone across the PC with the help of peripherals.
• MirrorGo enables an easy route of transferring files between the PC and Android device.
• Users can record their screens using the tools available on MirrorGo.

4,025,791 people have downloaded it

To understand the simple process of mirroring your Android screen across the PC, you need to follow the steps explained as follows:

Step 1: Download, Install and Launch

Users are requested to download the latest version of MirrorGo from their official website. Once installed, launch the application on the computer.

Step 2: Same Internet Connection

The user needs to ensure that the PC and Android device are connected across the same Wi-Fi connection. Once done, tap on the option of “Mirror Lava Blaze 2 Pro PC via Wi-Fi” on the lower bottom of the application’s interface.

Step 3: Attach through USB over Unsuccessful Connection

If the user fails to mirror the Lava Blaze 2 Pro device directly through Wi-Fi, they can connect their Android device with the PC via USB. Before that, it is important to turn on USB Debugging across the Android device for successful connection. Once the phone appears under “Select a device to connect,” you can remove the Android phone from the USB connection.

Step 4: Mirror and Control

Over selecting the Lava Blaze 2 Pro device for connection, a mirroring platform is established on the PC, and the user can now easily manage and control the Android screen across the PC.

Part 3: Ways to Screen Mirror Android with USB Cable

In this part of the article, we will discuss the most efficient ways to mirror Android screen on PC via USB cable. These ways include efficient applications like Vysor and ApowerMirror. Both of these applications allow a wired USB cable connection between two devices for the purpose of screen mirroring.

3.1 Screen Mirror Android Using Vysor

Vysor is a substitute screen mirror application that helps you to control your Android device through a laptop or PC. By using Vysor, you can play games, project your content in meetings or presentations, share data, etc., through screen mirroring.

Well, the advantages of this screen mirroring application include a bigger screen size, a high-resolution mirror, and no compulsory requirement for root access. It also supports Windows, GNU/LINUX, and macOS. Some of the steps below will show you how to do screen mirroring Lava Blaze 2 Pro PC or laptop using Vysor.

Step 1: Simply download the Vysor application from your “Google Play Store” application on your Android device.

Step 2: Now, you need to download the Vysor application for your PC or laptop in order to access screen mirroring. Vysor is available for all Mac, Chrome, Windows, and Linux.

Step 3: After complete downloading, you can now connect your Android device with a PC using a USB cable or Micro-USB.

Step 4: After a successful connection, you can now open the “Vysor” app on your Android device to check the basic setup. During the basic setup procedure, you need to turn on the “USB debugging” option. You can find it in the “Developers Options” for the proper working of the Vysor app.

Step 5: You need to allow USB debugging for your PC after opening Vysor. You just have to select “Ok” from the box that appears on the screen of your Android device.

Step 6: You can now see your Android device name on your PC on the Vysor app. You just need to click on the “View” option to see your Android device.

3.2 Control Android Screen Using ApowerMirror

ApowerMirror counts as one of the best screen mirroring applications among all the others. This app mainly applies the mainstream mirroring technology that is the reason for its ultimate mirroring experience. You are required to follow some steps that are listed below to cast Android screen to PC via ApowerMirror:

Step 1: Open your Android device “Settings” app and scroll down at the bottom of the page to see the settings of “Developer options.” Now further check the option of “USB debugging” and turn it on.

Step 2: In this step, you need to download ApowerMirror on your PC and install its setup. Now open the app from the Desktop.

Step 3: Now, use a USB cable to connect your Android device with your PC. After that, check the notification that appears on your Android device. Begin the mirroring process by clicking on the “Start Now” option in that notification.

vMix HD - Software based live production. vMix HD includes everything in vMix Basic HD plus 1000 inputs, Video List, 4 Overlay Channels, and 1 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Step 4: At last, you can now entertain yourself on a much bigger screen by controlling your Android device.

WonderFox DVD Ripper Pro

Final Words

This article covers everything about screen mirroring and its working with the need to cast Android screen to PC. We have discussed the concept of screen mirroring both by wired or wireless connection. With the help of this article, you can now share your Android screen on a laptop or PC and can share data like documents, images, games, etc.

Furthermore, Wondershare introduces us to software like MirrorGo. It helps us to build a wireless connection between devices that we want to connect for screen mirroring purposes.