How Can Tecno Spark 20 Pro+Mirror Share to PC?

It usually happens with you during an office presentation or a task where you encounter with such an important video or detail that you find effective to be discussed or shown among your colleagues. At such stages, there are no properly designed cheap tools available that would help you cast the screen from your phone onto a bigger screen, allowing people to have a good look over the screen and develop their analysis out of it. Screen Mirroring has provided an ultimate solution to such needs and presented impressive and simple platforms that would allow you to mirror your device onto a bigger screen. Tecno Spark 20 Pro+phones are counted among the most commonly used Android devices where people have complained about the availability of the screen sharing feature for displaying its screen onto massive ones for people to have a wider view of the objectives presented. This article discusses different mechanisms that allow you to mirror Tecno Spark 20 Pro+to PC through a variety of methods involving different functions of the phone.

Tecno Spark 20 Pro+has recognized the significance of the feature and has devised its mechanism by providing the screen mirroring capability on its phone. This built-in feature makes it quite easier for you to share Tecno Spark 20 Pro+’s screen to PC. The mirroring feature offered by Tecno Spark 20 Pro+can be countered in a few easy steps that are quite not strenuous to understand. To get ahold of Tecno Spark 20 Pro+’s mirror sharing feature to PC, follow the steps provided below.

Step 1: Open Connections from Computer

It is necessary to have your devices attached for screen mirroring through a single Wi-Fi connection. After connecting your PC and Tecno Spark 20 Pro+using the same Wi-Fi source, access the Notification Center of your PC by tapping on the bottom right button to lead to a new screen. Tap on “Connect” from the list of options under the Collapse section.

Step 2: Access Your Tecno Spark 20 Pro+

Following this, you need to select the option of mirroring Tecno Spark 20 Pro+screen to PC by accessing the Notification bar from the top of the phone. From the series of a different prompt button, you need to select “Wireless Projection” to mirror Tecno Spark 20 Pro+to PC.

Step 3: Selecting the Computer

A new window opens on the front of the screen. It will consist of the Tecno Spark 20 Pro+ devices that are available on the same Wi-Fi connection to get shared. After selecting the appropriate computer, you can conclude the procedure since anything opened on the screen can now be observed on the PC as well.

Part 2: MirrorGo: The Best Mirroring Application

If you are up for searching other options to mirror share Tecno Spark 20 Pro+to PC, there are many other platforms that may provide you effective mirroring services. However, while understanding the saturation that exists in the market, this article intends to provide you with a perfect platform for mirror sharing your Tecno Spark 20 Pro+to PC with ease.

Wondershare Dr.Fone offers the best results with HD resolution for a better experience over a big screen. This application intends to develop a controlled environment over the computer for the user, as compared to other platforms that desperately fail to offer a controlled foundation in screen mirroring. MirrorGo looks over a vast window of practical applications, for which it consists of tools that have a use apart from screen mirroring. MirrorGo offers you to record your mirrored device screen, take a screenshot of an important frame, or even have it shared across different viewing platforms. This platform seeks to induce a better approach to mirroring your Tecno Spark 20 Pro+to PC as compared to the other software existing in the market. To understand the simple guide on how to efficiently utilize the platform, you need to look over the steps adjourned below.

Wondershare Dr.Fone

Mirror your Tecno Spark 20 Pro+ deviceto your computer!

Share Tecno Spark 20 Pro+screen to computer.
Drag and drop files between your computer and phone directly.
Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
Use android apps on your PC for a full-screen experience.
Record your classic gameplay.
Screen Capture at crucial points.
Share secret moves and teach next level play.

4,227,666 people have downloaded it

Step 1: Connecting your PC

It is important to have your PC attached to the specific Tecno Spark 20 Pro+device that you wish to mirror onto it. For this, you can consume a USB cable to successfully establish a connection.

Step 2: Accessing Settings

Following this, you need to access the settings of you Tecno Spark 20 Pro+to open the “System & Updates” section. Click on the “Developer Options”. Then enable USB Debugging with the toggle available on the window.

Step 3: Mirror your Device

After successfully enabling USB Debugging, a pop-up appears on the Tecno Spark 20 Pro+device, asking for an establishment of a mirroring environment. Tap “Ok” to successfully mirror your device across the PC.

Mirroring Android Devices has been made easier with a very definitive and expansive device of AllCast where you can share your Tecno Spark 20 Pro+screen to PC by following a few steps, as stated below.

Step 1: Download Applications on both devices

You need to have the AllCast application on both your PC and Tecno Spark 20 Pro+phones for connecting them, and mirrors share your screen to the PC.

Step 2: Open Computer Receiver

After ensuring that the PC, as well as the mobile phone, are connected over the same Wi-Fi device, you need to initiate the process by opening the AllCast Receiver through the Chrome Application Launcher.

Step 3: Initiate Mirror Share

After getting the appropriate settings on the computer, you need to propagate towards the phone. Initiate ‘Screen Recording and Mirror’ on the Tecno Spark 20 Pro+.

Step 4: Synchronize Devices

In the options presented by “Screen Recording and Mirror,” you need to access the “Network Devices” and select the appropriate desktop model. Selecting the model will start screen sharing with ‘Chrome @’ followed by the IP Address of the computer. This allows you to mirror your Tecno Spark 20 Pro+screen to PC wirelessly through AllCast without difficulty.

Conclusion

This article has introduced several screens mirroring platforms that can be used to mirror share Tecno Spark 20 Pro+to PC. The perfect adoption of such issues will surely lead you to understand the system more appropriately and develop a ground where you present an effective change through this function.

How to Screen Mirroring Tecno Spark 20 Pro+ to PC?

Suppose we consider a situation where you are sitting in a presentation. You discover a major factor that is to be addressed and explained to your colleagues for developing a point, primarily, and have them moved over the point. It would get extremely difficult for you to show your smartphone’s screen to the people sitting there all at once. For avoiding certain disciplinary and time losses, you require the screen to be mirrored to something bigger and wider for everyone to see in the room. This article considers different mechanisms adapted to mirror your Tecno Spark 20 Pro+ and other Android smartphones to PC.

Part 1: Screen Mirroring Tecno Spark 20 Pro+ to PC via Wi-Fi – Dr.Fone Air

There are many screen mirroring facilities you might come across in the market. Considering the functionality being dealt with, efficiency is a major requirement for many users. Wondershare Dr.Fone Air is an online solution providing screen mirroring Tecno Spark 20 Pro+ services to people under a simple operation. If you are looking for a quick solution to mirror your Tecno Spark 20 Pro+ phone to a PC, this tool is a great thing to consider.

You can wirelessly connect your smartphone to the PC’s web browser without paying any price associated with the services. Dr.Fone Air does not disappoint you with the effective Tecno Spark 20 Pro+ screen mirroring that it flexibly executes. To know more about this professional tool for presenting your Tecno Spark 20 Pro+ screen on a PC, you must look into these features:

This mirroring solution is free to use and has no associated ads attached throughout, which does not hinder your mirroring experience.
It does not require you to access Bluetooth, NFC, or other services to connect with the computer.
You can have a flexible phone screen control for adjusting the screen in the best way possible.

Steps to Mirror Your Tecno Spark 20 Pro+ to PC using Dr.Fone Air

We will now look into how to wireless display Tecno Spark 20 Pro+ devices on the computer with this mirroring solution, which will be covered through a Wi-Fi connection:

Step 1: Open Dr.Fone Air on Browser

You must launch any browser on your computer and open the official link of Dr.Fone Air to initiate the process. Ensure that the PC and Tecno Spark 20 Pro+ devices are connected to the same Wi-Fi network.

Step 2: Connect Tecno Spark 20 Pro+ through Available Codes

Install the Dr.Fone Link application on your Tecno Spark 20 Pro+ device and scan the QR code displayed on the screen. You can also use the cast code provided below the QR code to connect the Tecno Spark 20 Pro+ devices.

Step 3: Successfully Mirror Tecno Spark 20 Pro+ with PC

As the Tecno Spark 20 Pro+ devices are connected, Xiaomi’s screen is displayed on the computer, which shows that the mirroring is completed.

Part 2: Screen Mirroring Tecno Spark 20 Pro+ to PC with MirrorGo

There might be many ways that can help you implement screen mirroring over your PC; however, the question comes over the quality of the approach that is being undertaken. While realizing the variety of mechanisms that can be consumed to screencast your Android to PC, there is another approach that offers the most unique and coherent interface to work on. Wondershare Dr.Fone outsmarts the other existing platforms and offers a user experience that enhances the dynamics of screencasting. Following an HD result in the display, MirrorGo officially settles itself as a perfect mechanism for exempting tired eyes while playing over the Android smartphone. Following the mirroring features offered at MirrorGo, it regards itself as a screen recorder and a screen capturer. This leads you to a more expansive utility as compared to other existing mirroring solutions. Another aspect that makes MirrorGo the perfect option is the synchronization feature that allows you to stay put with the data across your Android smartphone. Sharing your Tecno Spark 20 Pro+ to PC is a very simple procedure with MirrorGo, which can be understood from the guide provided as follows.

Wondershare Dr.Fone

Mirror your Tecno Spark 20 Pro+ deviceto your computer!

Drag and drop files between your computer and phone directly.
Send and receive messages using your computer`s keyboard, including SMS, WhatsApp, Facebook, etc.
View multiple notifications simultaneously without picking up your phone.
Use android apps on your PC for a full-screen experience.
Record your classic gameplay.
Screen Capture at crucial points.
Share secret moves and teach the next-level play.

4,958,941 people have downloaded it

Step 1: Connecting your Computer with the Phone

You need to attach your Tecno Spark 20 Pro+ with the PC through a USB Cable. Following the connection, you need to tap on the option of “Transfer Files” provided in the prompt message.

Step 2: USB Debugging

Following a successful establishment of a connection with the computer, you need to access the Settings of your Tecno Spark 20 Pro+ and lead towards the System & Updates section in the list. Following this, you need to tap on the Developer Option to lead towards the next window containing the option of USB Debugging. Enable the settings with the available toggle.

Step 3: Establish Mirroring

A prompt message appears on the screen for the establishment of the connection. Tap “Ok” to successfully attenuate your Android with the PC.

Step 4: Mirroring is done.

Now you can see your Tecno Spark 20 Pro+ phone screen on the computer screen.

Part 3: Screen Mirroring Tecno Spark 20 Pro+ to PC via USB – Scrcpy

You can utilize another conventional mechanism of screen mirroring your Tecno Spark 20 Pro+ to PC using the Phone’s Scrcpy. Initially, you need its extension file on your computer, which can be downloaded from the Internet with ease.

Step 1: Extract and Launch

After downloading the archive folder of Scrcpy on your computer, you need to extract the files and launch the .exe file. However, it is important to connect your Android phone with the PC to avoid prompt errors.

Step 2: Enable USB Debugging on your Phone

You need to open the Settings on your phone and access its About Phone section. If your Developer Options are not enabled, you need to tap on the build number present on the screen multiple times, followed by opening the screen and selecting the option of USB Debugging from the list to have it enabled.

Step 3: Run Scrcpy File

After enabling the USB Debugging mode, you need to re-launch the .exe file on your computer and allow all the prompt messages received on your phone. This will conclusively mirror your Tecno Spark 20 Pro+ screen to PC without any discrepancies. However, it should be kept in mind that the process elapses as soon as you detach your phone from the USB connection.

Part 4: Screen Mirroring Tecno Spark 20 Pro+ to PC Wirelessly – Vysor

Vysor has presented itself as a very strong screen mirroring application for Android phones such as Xiaomi. It provides a USB and ADB connection to its users who wish to mirror Tecno Spark 20 Pro+ to PC using Vysor. This application might be referred to as the best in the market; however, it still presents a very peculiar drawback for many of its consumers. Many people have reported a high drainage rate of their phone’s battery over using Vysor for screen mirroring through a USB connection. This article looks forward to presenting you with the usage of ADB connection in screen sharing Tecno Spark 20 Pro+ to your PC.

Step 1: Initiate USB Debugging on your Phone

You need to have USB debugging enabled on your phone to connect your Tecno Spark 20 Pro+ through the ADB connection. If it is not automatically enabled, you need to simply approach the Settings of your phone and open About Phone. You need to open your Developer Options or have them enabled if never done before by tapping on the build number multiple times before enabling the option of USB debugging inside the Developer options.

Step 2: Open Command Prompt on PC

Turn on the Command Prompt on your PC to initiate an ADB command terminal. For that, you need to type in ‘adb tcpip 5556’ to restart ADB in TCPIP mode.

Step 3: Locate your IP Address

Following this, you need to locate the IP address of your Xiaomi. If you have a phone with an OS version below 6.0, type in:

Adb shell

Netcfg

Conversely, for phones greater than Android 7, sulk in:

Adb shell

ifconfig

A list shall appear on the Command Prompt, showing a list of all the local IP addresses associated with the computer. You need to locate the IP address of your Tecno Spark 20 Pro+ Android phone and have it copied on the clipboard.

Step 4: Close and Re-Type IP Address

You need to exit the ADB window to re-type the IP address for connecting your PC with the phone. Type ‘ADB shell’ to exit the window; however, keep the terminal open. Retype the IP address on the screen.

Step 5: Remove USB Cable and Confirm Connection

Following this, you need to remove the USB cable and continue using your phone using the ADB connection through the Wi-Fi and Hotspot connection of your phone. To confirm, you can check the Tecno Spark 20 Pro+ device connected through Vysor to observe it active on the list. You can simply connect to the phone in a normal manner for screen mirroring Tecno Spark 20 Pro+ to PC.

Part 5: Screen Mirroring Tecno Spark 20 Pro+ to PC with Mi PC Suite

Step 1: Download Mi PC Suite

To successfully screen share your Tecno Spark 20 Pro+ to PC, you can access the official website of Mi PC Suite to have it downloaded on the PC.

Step 2: Launch the PC Suite

After downloading the application, you need to simply launch it and observe the screen on the front showing the option of Connect your Device. You need to attach your Tecno Spark 20 Pro+ phone to your PC using USB Cable.

Step 3: Enable Screencast After Successful Connection

Your phone might take a while to install the drivers for connecting to the PC. After the successful installation of drivers, the details of the phone appear on the screen on the front. You simply need to select the option of Screencast present on the bottom of the phone in the PC Suite. This lodges your screen onto the PC successfully.

Conclusion

This article has featured a list of different screen mirroring solutions you can use on your Tecno Spark 20 Pro+ device. If you are looking for an effective Mi screen mirroring on a PC, you can use tools like Dr.Fone Air to mirror smartphones effectively without taking considerable time. The provided solutions are among the best options, saving you time and effort in connecting devices successfully.

How to Cast Tecno Spark 20 Pro+ Screen to PC Using WiFi

Today most people are using smartphones with an android operating system which actually has become the first choice for so many people. Although you can enjoy so many brilliant and advanced features on the android platform, the thing which makes people sometimes annoyed and uneasy at the same time is an inferior visual experience on a small screen. People often miss their good experiences on large screens when they watch their favorite videos and movies even while they are making video calls to their favorite persons. But now the time has changed and so has the technology which literally allows you to enjoy the benefit of a large screen with your same small android device. This is called screen mirroring. So, let’s discuss what screen mirroring and casting is actually and how to cast android screen to PC using WiFi.

Part 1: What is Screen Mirroring Android and Casting

Today, most android devices are coming with a built-in screen mirroring feature which simply allows you to upgrade and enhance your viewing experience. With this, you can simply mirror the android screen on a PC via WiFi. And for this, all you just need is the right platform for both of your devices which means your PC, as well as your smartphone, must have some built-in cast screen or screen mirror feature or software as well.

So, here you can say that Screen Mirroring is basically a process where you can actually replicate the screen of your Tecno Spark 20 Pro+ deviceon a larger screen like a Computer or Laptop. Not only this, but you can also present your android mobile screen on your Smart TVs or other wireless display supported devices as well.

There is basically three wireless screen mirroring technologies for android. One is Chromecast, the second is Miracast and the next is third-party Software. With Miracast, you can simply enjoy the benefit of screen mirroring of your Tecno Spark 20 Pro+ deviceon your computer or Smart TV.

However Screencasting is somehow different from screen mirroring where you simply are required to click on the cast icon of related apps on your Tecno Spark 20 Pro+ deviceand ultimately you will be able to view the content playing directly by the casting device like Android TV or Chromecast etc.

Thereafter, all you need to do is operate your Tecno Spark 20 Pro+ devicefor changing the displaying content from the different apps stored in your Tecno Spark 20 Pro+ device like Amazon Prime, Netflix, and Youtube, etc. And then your selected content will be directly picked up by the streaming device which should be connected to the same Wi-Fi as to your android.

In this given post, here we are going to provide you with the different choices where you can easily view phone screens on PC via WiFi. So, let’s try all of the options and choose one best!

Part 2: Casting Android Screen to PC with ChromeCast

For using this method, you will be required to create a personal Wi-Fi Hotspot. Here you can follow this method in the following way:

For Computer:

Go to the ‘Search’ Bar.
Type ‘Connect’.
Open ‘Connect App.

Here you will find suitable options for hotspot connection.

For Android (Version 5,6, 7):

Go to ‘Settings’.
Choose ‘Display’.
Select ‘Cast’.
Then click on the three dots to view ‘Menu’.
Then choose the ‘Enable Wireless Display’ option.

For Android (Version 8):

Go to ‘Settings’.
Choose ‘Connected Devices’.
Select ‘Cast’.
Then click on the three dots to view ‘Menu’.
Then choose the ‘Enable Wireless Display’ option.

Now you have to wait until and unless the Tecno Spark 20 Pro+ device is found. You can check the name of your system in the ‘Connect’ app.

Then click on the Tecno Spark 20 Pro+ device name.

With this, you will be able to cast the screen of one device to another.

Part 3: Casting Android Screen to PC with MiraCast

The next method which you can possibly consider using is MiraCast for mirroring your screen over the internet.

Here for turning your PC into a Miracast receiver, you can simply follow the given steps:

Turn On Your PC.
Go to the ‘Start menu.
Now click on the ‘Connect’ app.

If you are not finding this app, I would like to suggest you upgrade your system to the Anniversary update.

Now when you open the ‘connect’ app, it will display a message regarding your system being ready to attach wirelessly on your screen. That’s it.

Here you are absolutely not required to interact with any network server settings or any firewall as well. So, simply tap to open the app every time you need this.

Part 4: Casting Android Screen To PC with Screen Mirroring Tool - Mirror Go

To fulfill your requirement of mirroring your Android device with your PC in the best possible manner, you can certainly choose Wondershare Dr.Fone which is absolutely powerful enough in providing you an intelligent solution with advanced experience as well.

Either you want to play video games on a big screen with your friends or you want to use it for presenting your business idea, this Wondershare Dr.Fone software is absolutely going to help you in mirroring your device on a large screen in the quick and easiest manner.

Try It Free

Now for casting your android mobile screen to PC with the help of Wondershare Dr.Fone software, here you can follow the given steps:

Step One: Download & Install MirrorGo:

First of all, you will be required to download the latest available version of this MirrorGo Software which you can easily download in just one click from its official website.

Step Two: Launching MirrorGo in Computer:

If you have finished with the installation of Wondershare Dr.Fone Software then here you are recommended to launch this software on your device by following the given instructions on your screen.

Step Three: Ensure Same WiFi Connection:

Here the next step is to ensure whether both your android phone and your computer are connected with the same internet connection or not. If you find this good then you can surely proceed further.

Step Four: Mirror Android With Computer:

As you have successfully established the same internet connection for both of your devices, now here you are ready to cast your android screen with PC. For this, you simply need to choose the ‘Mirror Android to PC via WiFi’ option.

Step Five: Mirror And Control: After this, simply choose the android device that you wish to cast on your PC. With this, you can see that your android screen will be mirrored on your PC. Moreover, here you can also manage and control your Tecno Spark 20 Pro+ deviceacross the personal computer.

Part 5: Mirroring Android Screen to PC with Online Screen Mirroring Tool - Dr.Fone Air

With all the casting solutions provided above, it might make your experience better if you’d consider using a screen mirroring solution. Wondershare Dr.Fone Air is an online screen mirroring solution that offers a quick and effective functionality to mirror the screen of your Android to a PC.

As it is a wireless solution, you have to cover the complete process with the help of a Wi-Fi connection. Rather than casting the Android screen to a PC, you can realize this solution as a perfect option for covering lectures, meetings, and other uses.

Key Features Provided by the Online Screen Mirroring Solution

There are some prominent features of this online mirroring solution that makes it a special choice in the market. Let’s find out more about these features below:

You are not required to use a Bluetooth or NFC connection for mirroring the Tecno Spark 20 Pro+ device.
The tool is completely free and does not have any ads associated with it.
You can adjust the mirrored screen by zooming, rotating, or taking screenshots.

What is the Disadvantage of Screen Casting?

Screen casting, as a process, is not better than screen mirroring. Essentially, this process does not allow you to use the mobile when it is connected to the computer. If you have connected your Android to the PC through screencasting, you will have to disconnect it to use the mobile phone.

How to Use Dr.Fone Air for Screen Mirroring Android to PC

If you wish to know how to screen mirror your Android to a PC, find out how to perform the steps below:

Step 1: Launch Dr.Fone Air

Start by opening Wondershare Dr.Fone Air on the browser. Proceed to connect your Android and PC under the same Wi-Fi connection.

Step 2: Use QR Code or Cast Code

As you connect the Tecno Spark 20 Pro+ devices, you must install Dr.Fone Link to connect the Android to the PC with this screen mirroring tool. Use the QR code or casting code shown on the screen of the browser.

Step 3: Mirror Android to PC

On successfully scanning or entering the code, the Android will be mirrored to the PC with Dr.Fone Air.

Conclusion

The provided solutions have been quite comprehensive in showing you how to cast an Android screen to a PC. While you can try using these solutions, Wondershare Dr.Fone Air provides you with a much better sequence of mirroring your Android to the PC with ease. While using only a Wi-Fi connection, you can enjoy watching the Android screen on your PC seamlessly.

Screen Mirror

How Can Tecno Spark 20 Pro+Mirror Share to PC? | Dr.fone