How Can Lava Blaze Curve 5GMirror Share to PC?

It usually happens with you during an office presentation or a task where you encounter with such an important video or detail that you find effective to be discussed or shown among your colleagues. At such stages, there are no properly designed cheap tools available that would help you cast the screen from your phone onto a bigger screen, allowing people to have a good look over the screen and develop their analysis out of it. Screen Mirroring has provided an ultimate solution to such needs and presented impressive and simple platforms that would allow you to mirror your device onto a bigger screen. Lava Blaze Curve 5Gphones are counted among the most commonly used Android devices where people have complained about the availability of the screen sharing feature for displaying its screen onto massive ones for people to have a wider view of the objectives presented. This article discusses different mechanisms that allow you to mirror Lava Blaze Curve 5Gto PC through a variety of methods involving different functions of the phone.

Part 1: Lava Blaze Curve 5GMirror Share to PC using Lava Blaze Curve 5G’s Multi-Screen

Lava Blaze Curve 5Ghas recognized the significance of the feature and has devised its mechanism by providing the screen mirroring capability on its phone. This built-in feature makes it quite easier for you to share Lava Blaze Curve 5G’s screen to PC. The mirroring feature offered by Lava Blaze Curve 5Gcan be countered in a few easy steps that are quite not strenuous to understand. To get ahold of Lava Blaze Curve 5G’s mirror sharing feature to PC, follow the steps provided below.

Step 1: Open Connections from Computer

It is necessary to have your devices attached for screen mirroring through a single Wi-Fi connection. After connecting your PC and Lava Blaze Curve 5Gusing the same Wi-Fi source, access the Notification Center of your PC by tapping on the bottom right button to lead to a new screen. Tap on “Connect” from the list of options under the Collapse section.

Step 2: Access Your Lava Blaze Curve 5G

Following this, you need to select the option of mirroring Lava Blaze Curve 5Gscreen to PC by accessing the Notification bar from the top of the phone. From the series of a different prompt button, you need to select “Wireless Projection” to mirror Lava Blaze Curve 5Gto PC.

Step 3: Selecting the Computer

A new window opens on the front of the screen. It will consist of the Lava Blaze Curve 5G devices that are available on the same Wi-Fi connection to get shared. After selecting the appropriate computer, you can conclude the procedure since anything opened on the screen can now be observed on the PC as well.

Part 2: MirrorGo: The Best Mirroring Application

If you are up for searching other options to mirror share Lava Blaze Curve 5Gto PC, there are many other platforms that may provide you effective mirroring services. However, while understanding the saturation that exists in the market, this article intends to provide you with a perfect platform for mirror sharing your Lava Blaze Curve 5Gto PC with ease.

Wondershare Dr.Fone offers the best results with HD resolution for a better experience over a big screen. This application intends to develop a controlled environment over the computer for the user, as compared to other platforms that desperately fail to offer a controlled foundation in screen mirroring. MirrorGo looks over a vast window of practical applications, for which it consists of tools that have a use apart from screen mirroring. MirrorGo offers you to record your mirrored device screen, take a screenshot of an important frame, or even have it shared across different viewing platforms. This platform seeks to induce a better approach to mirroring your Lava Blaze Curve 5Gto PC as compared to the other software existing in the market. To understand the simple guide on how to efficiently utilize the platform, you need to look over the steps adjourned below.

Wondershare Dr.Fone

Mirror your Lava Blaze Curve 5G deviceto your computer!

• Share Lava Blaze Curve 5Gscreen to computer.
• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.
• Share secret moves and teach next level play.

4,227,666 people have downloaded it

Step 1: Connecting your PC

It is important to have your PC attached to the specific Lava Blaze Curve 5Gdevice that you wish to mirror onto it. For this, you can consume a USB cable to successfully establish a connection.

Step 2: Accessing Settings

Following this, you need to access the settings of you Lava Blaze Curve 5Gto open the “System & Updates” section. Click on the “Developer Options”. Then enable USB Debugging with the toggle available on the window.

Step 3: Mirror your Device

After successfully enabling USB Debugging, a pop-up appears on the Lava Blaze Curve 5Gdevice, asking for an establishment of a mirroring environment. Tap “Ok” to successfully mirror your device across the PC.

Part 3: Lava Blaze Curve 5GMirror Share to PC wirelessly via AllCast

Mirroring Android Devices has been made easier with a very definitive and expansive device of AllCast where you can share your Lava Blaze Curve 5Gscreen to PC by following a few steps, as stated below.

Step 1: Download Applications on both devices

You need to have the AllCast application on both your PC and Lava Blaze Curve 5Gphones for connecting them, and mirrors share your screen to the PC.

Step 2: Open Computer Receiver

After ensuring that the PC, as well as the mobile phone, are connected over the same Wi-Fi device, you need to initiate the process by opening the AllCast Receiver through the Chrome Application Launcher.

Step 3: Initiate Mirror Share

After getting the appropriate settings on the computer, you need to propagate towards the phone. Initiate ‘Screen Recording and Mirror’ on the Lava Blaze Curve 5G.

Step 4: Synchronize Devices

In the options presented by “Screen Recording and Mirror,” you need to access the “Network Devices” and select the appropriate desktop model. Selecting the model will start screen sharing with ‘Chrome @’ followed by the IP Address of the computer. This allows you to mirror your Lava Blaze Curve 5Gscreen to PC wirelessly through AllCast without difficulty.

Conclusion

This article has introduced several screens mirroring platforms that can be used to mirror share Lava Blaze Curve 5Gto PC. The perfect adoption of such issues will surely lead you to understand the system more appropriately and develop a ground where you present an effective change through this function.

How Lava Blaze Curve 5G Mirror Screen to PC?

Mirror Screening has been devised as one of the most exquisite and simplest features in sharing data that provides you with the ability to share your smaller screens onto larger ones for people to observe the information presented easily. Many mirror screening applications have been introduced and have been brought on the front to filter out the best in the market; however, the method involving sharing the screen to the PC or other associated devices have been recognized as quite simple and effective in performance. This article provides Lava Blaze Curve 5G users, in specific, a list of solutions that can act as the easiest and the most convenient in allowing them to share their screen with a PC.

Part 1: Why Need Screen Mirroring?

If we consider the traditional and conventional methods of connecting AV cables, HDMI’s, or VGA adapters for connecting smaller screened devices to larger screens, these methods present too much work and a series of protocols that potentially outdated the system completely. In the environment that we survive in, it is significant for us to understand that presenters keep their data intact on their smartphones and have it efficiently shared among his colleagues before the discussion. The wireless screen technology enables presenters to pose such a system into power, which not only increases the mobility but the efficiency of the system too without any unnecessary delays in connecting the Lava Blaze Curve 5G device with a larger platform. Screen mirroring can be set as the most optimal solution to such issues, which would not only allow you to enjoy presenting but save a lot of effort before developing the frame of presentation.

Part 2: How to Mirror Android to PC Wirelessly?

Screen mirroring can be covered through wired and wireless connections. If you are willing to work on a wireless solution, there are several options to come by. In this part, we will be analyzing the multiple options that can be used for Lava Blaze Curve 5G mirroring to a PC.*

1. Lava Blaze Curve 5G View in Lava Blaze Curve 5G Flow

Lava Blaze Curve 5G Flow is known for providing multiple device solutions for Lava Blaze Curve 5G smartphone users. For people who are searching for an option to perform screen mirroring on their PC, they can try this official approach of mirroring Lava Blaze Curve 5G devices to their PC.

With the option of providing seamless access to Lava Blaze Curve 5G users, the Lava Blaze Curve 5G View function gives a perfect system of mirroring the Lava Blaze Curve 5G device in no time. To know how Lava Blaze Curve 5G View in Lava Blaze Curve 5G Flow helps in Lava Blaze Curve 5G mirroring to PC,* you must look into the following steps:

Step 1: You must start by downloading and installing the Lava Blaze Curve 5G Flow application on your computer and Lava Blaze Curve 5G smartphone. Before launching the application for mirroring the Lava Blaze Curve 5G device to a PC, you must ensure that the Lava Blaze Curve 5G devices are connected to the same Wi-Fi.

Step 2: Following this, you must go through the PC version of Lava Blaze Curve 5G Flow and find your phone name to generate the credentials to connect the Lava Blaze Curve 5G device to the PC. This pairing process will generate a passcode that needs to be entered into the phone to initiate a connection.


Step 3: As the pairing process succeeds, you can click on the “Smart View” button on the PC to mirror the Lava Blaze Curve 5G to your PC.


2. Wondershare Dr.Fone Air – Online Screen Mirror

For a better user experience, Wondershare Dr.Fone Air provides an online, wireless screen mirroring experience with no specific requirements of user efforts. This tool features a simple environment for putting up a Lava Blaze Curve 5G device for screen mirroring on the PC. Along with diverse compatibility, this tool provides a quick solution with the option of saving time and cost for the user. There are many pointers that make Wondershare Dr.Fone Air a provocative solution to work with, which are featured as follows:

• You are not required to connect your Lava Blaze Curve 5Gs through Bluetooth and NFC.
• There are no ads covering the tool, avoiding all sorts of damage to the user experience.
• It allows you to adjust the mirrored screen by rotating, zooming, and taking screenshots.

We will now shift towards mirroring the Lava Blaze Curve 5G screen to the PC with the help of Wondershare Dr.Fone Air. For that, we will use the following steps as help:

Step 1: Launch Dr.Fone Air and Connect to Wi-Fi

You must open the Dr.Fone Air platform on the web browser of your PC. Continue with connecting the Lava Blaze Curve 5G and computer with the same Wi-Fi connection.

Step 2: Scan or Add Code for Connection

Following this, you must install the Dr.Fone Link on your device and continue connecting both devices. You can make use of the QR code or cast code for connecting both devices.

Step 3: Mirror Lava Blaze Curve 5G Device to PC

On scanning the code, the Lava Blaze Curve 5G devices connect with each other, and the Lava Blaze Curve 5G screen successfully mirrors the PC.

3. Connect App on Windows

Windows devices come with another great option of screen mirroring a device onto the screen without requiring downloading any tool. This feature was made available on Windows 10 devices and continues to provide users with a quick solution to Lava Blaze Curve 5G screen mirroring to PC.* The Connect App can be considered to connect your Lava Blaze Curve 5G device with the PC by following a set of steps, which are discussed as follows:

Step 1: You need to access the “Action Center” on the bottom-right of the screen and proceed to activate “Bluetooth” from the available options. Afterward, select the “Connect” option.


Step 2: Afterward, open the “Quick Menu” of your Lava Blaze Curve 5G device and enable the option of “Smart View.” You will see all the available options on your Lava Blaze Curve 5G screen with whom you can create a connection. Select your device from the list and press the “Start Now” button to start the mirroring process.


Step 3: Following this, you will receive a confirmation pop-up notification on your PC. You have to hit the “OK” button to mirror your Lava Blaze Curve 5G phone to your PC successfully.


4. Mirror Lava Blaze Curve 5G Phone to PC with MirrorGo

There is no bigger brand for Android phones than Lava Blaze Curve 5G. The phones are loaded with features that offer users convenience, such as fast charging. You can also mirror your Lava Blaze Curve 5G phone to the PC with the help of MirrorGo by Wondershare.

The tool is accessible from Windows and works well with every known model of Lava Blaze Curve 5G Android phones. If you wish to transfer files, play games, or watch movies from phone to PC, then MirrorGo will enable everything for you. The simplistic and fast interface of the software allows you to complete the task at hand quickly.

Wondershare Dr.Fone

Mirror your Lava Blaze Curve 5G deviceto your computer!

• Play mobile games on the big screen of the PC with MirrorGo.
• Store screenshots taken from the phone to the PC.
• View multiple notifications simultaneously without picking up your phone.
• Use android apps on your PC for a full-screen experience.

4,783,042 people have downloaded it

The steps to mirror the Lava Blaze Curve 5G device using MirrorGo from PC are listed follows:

Step 1: Access MirrorGo

The first step is to download the software on your PC. Run the app after installing it. Make sure the Lava Blaze Curve 5G phone is connected to the PC, and the File Transfer option is enabled from the phone’s USB settings.

Step 2: Enable USB Debugging and Developer Mode

Tap on the About Phone button from Settings and tap on Build Number 7 times to activate the Developer Mode. Go to Additional Settings and check the Debugging Mode option. Tap on OK to finalize the procedure.

Step 3: Mirror the Lava Blaze Curve 5G Phone using MirrorGo

Now, look over to the MirrorGo’s interface, and you will see the main screen of your Lava Blaze Curve 5G device there. The mirroring will be enabled on the Lava Blaze Curve 5G device.

Part 3: How to Mirror Android to PC without Root via USB

While there are many wireless solutions that you can come across for mirroring your Android device to the PC, you can also try using the wired methods. If you are not finding the right platform to establish a wireless connection, you will have to mirror the Android device to the PC through a USB connection. There are many options available, out of which we have highlighted the following tools for you:

1. AirDroid Cast

AirDroid Cast is a renowned method available for users who seek to mirror their Android device to their PC through a USB connection. The tool is majorly focused on providing casting solutions to users who seek to put their devices’ display on a bigger screen. While the tool establishes a strong connection, it offers powerful casting support. Although the process takes a while to conclude, it can still be considered a great option if you are looking to Lava Blaze Curve 5G cast to a PC* through a USB connection. Look into the following steps to know how you can use AirDroid Cast for this purpose:

Step 1: You must download and install AirDroid Cast on your computer and proceed to launch it. Redirect to the “USB” section from the top and connect your Android to the PC through a cable connection.

Step 2: In the “Available Device” list, select the Lava Blaze Curve 5G device you want to cast.


Step 3: You might have to enable USB debugging on your Lava Blaze Curve 5G device. For this, access “Settings” and look for the “About phone” option. Proceed into the “Software information” section and look for “Build number” on the next screen. Tap it seven times until you become a developer, which will allow you to enable USB debugging.


Step 4: Redirect into the “Settings” of your Lava Blaze Curve 5G device and find the “Developer options.” Look for the “USB Debugging” option on the next screen and turn on the toggle. As the process is concluded successfully, the Lava Blaze Curve 5G screen is cast onto the PC.


2. Vysor

If you are looking to mirror your Lava Blaze Curve 5G screen to the PC with another option, Vysor is a good option to work with without rooting your device. This process requires you to utilize the USB connection for establishing the screen mirroring environment. Following this, Vysor provides a diversity of options to set, which acts as the parameters of the final product being obtained. Let’s look at how you can screen mirror your Lava Blaze Curve 5G device on Vysor:

Step 1: Download and install Vysor on your Windows computer and continue to launch it. As it opens on the new window, proceed to initialize the settings.

Step 2: You must connect your Google account with Vysor if required. Checkmark the options of “International Keyboard” and “Share All Devices” to mirror the Lava Blaze Curve 5G on your PC.


Step 3: As you connect your Lava Blaze Curve 5G to the PC through a wire, ensure that USB debugging is enabled for the Lava Blaze Curve 5G device. If it is enabled, it will be automatically detected by Vysor. Continue clicking on the “View” button to observe the mirroring results on your PC.


Conclusion

This article has provided a comprehensive overview of how one can mirror their Lava Blaze Curve 5G device with the right set of methods. As you have the option of adopting both wireless and wired methods, this article helps you out in making proper decisions. Wondershare Dr.Fone Air provides one of the simplest options for mirroring the Lava Blaze Curve 5G device to the PC in no time. Try this free wireless option for the perfect Lava Blaze Curve 5G screen mirroring to a PC.*

A Guide Lava Blaze Curve 5G Wireless and Wired Screen Mirroring

In simple words, screen mirroring is an approach to mirror the screens of two devices with one another. For instance, you can mirror your Android phone screen on the computer and the other way round. In this article, viewers will get to know how to mirror an Android screen on PC wirelessly or through a USB cable.

Screen Mirroring is quite useful in many ways. It allows you to display the screen of your Android phone, tablet, or PC on another device through a wired or wireless connection between both devices. In today’s life, not everyone is familiar with screen mirroring technology.

Part 1: What is Screen Mirroring?

Screen Mirroring is such technology that permits you to display your content from your device to another device. In the case of screen mirroring Lava Blaze Curve 5G PC, this could be done through both wireless and wired connections. At the same time, screen mirroring can be done when one device continuously sends the copy of its screen to another targeted device simultaneously.

In a meeting or presentation, screen mirroring plays an important role by facilitating team members to avoid complex setups and share their screens immediately. Moreover, screen mirroring supports the BYOD model, that is, “Bring Your Own Device.” The reason for supporting this model is to lower the cost and increase efficiency.

Part 2: Prerequisites for Android Screen Mirroring

To successfully cast Android screen to PC, the screen mirroring apps should work properly. For this purpose, it is recommended to do some settings on your Android device. The steps of settings for enabling both developer options and USB debugging are discussed below:

Enable Developer option

Step 1: Open the “Settings” app on your Android phone and choose “System” settings from the list. Now click on the “About Phone” option from the top of the screen.

Step 2: Now, you need to scroll down and click the “Build Number” option five times.

Step 3: Proceed back on the “System” settings, where you will find a “Developer” option present.

Enable USB Debugging

Step 1: First, open your Android phone “Settings” and go to “System” settings. Now click on the “Developers” option on the next screen.

Step 2: Now go down and turn on the “USB Debugging” option.

Part 4: Efficient and Fast Wireless Android Screen Mirroring Tool - MirrorGo

If you are looking for an advanced experience of mirroring your Android device with the PC, Wondershare Dr.Fone features an intelligent solution with efficiency. Whether you are presenting your business idea across a large screen or enjoying gaming with your friends, MirrorGo presents a quick and simple solution for mirroring your device with ease.

Wondershare Dr.Fone

Mirror your Lava Blaze Curve 5G deviceto your computer!

• Utilize the Game Keyboard for mapping the keys across your keyboard to an Android device.
• Easily manage and control your Android phone across the PC with the help of peripherals.
• MirrorGo enables an easy route of transferring files between the PC and Android device.
• Users can record their screens using the tools available on MirrorGo.

4,025,791 people have downloaded it

To understand the simple process of mirroring your Android screen across the PC, you need to follow the steps explained as follows:

Step 1: Download, Install and Launch

Users are requested to download the latest version of MirrorGo from their official website. Once installed, launch the application on the computer.

Step 2: Same Internet Connection

The user needs to ensure that the PC and Android device are connected across the same Wi-Fi connection. Once done, tap on the option of “Mirror Lava Blaze Curve 5G PC via Wi-Fi” on the lower bottom of the application’s interface.

Step 3: Attach through USB over Unsuccessful Connection

If the user fails to mirror the Lava Blaze Curve 5G device directly through Wi-Fi, they can connect their Android device with the PC via USB. Before that, it is important to turn on USB Debugging across the Android device for successful connection. Once the phone appears under “Select a device to connect,” you can remove the Android phone from the USB connection.

Step 4: Mirror and Control

Over selecting the Lava Blaze Curve 5G device for connection, a mirroring platform is established on the PC, and the user can now easily manage and control the Android screen across the PC.

Part 3: Ways to Screen Mirror Android with USB Cable

In this part of the article, we will discuss the most efficient ways to mirror Android screen on PC via USB cable. These ways include efficient applications like Vysor and ApowerMirror. Both of these applications allow a wired USB cable connection between two devices for the purpose of screen mirroring.

3.1 Screen Mirror Android Using Vysor

Vysor is a substitute screen mirror application that helps you to control your Android device through a laptop or PC. By using Vysor, you can play games, project your content in meetings or presentations, share data, etc., through screen mirroring.

Well, the advantages of this screen mirroring application include a bigger screen size, a high-resolution mirror, and no compulsory requirement for root access. It also supports Windows, GNU/LINUX, and macOS. Some of the steps below will show you how to do screen mirroring Lava Blaze Curve 5G PC or laptop using Vysor.

Step 1: Simply download the Vysor application from your “Google Play Store” application on your Android device.

Step 2: Now, you need to download the Vysor application for your PC or laptop in order to access screen mirroring. Vysor is available for all Mac, Chrome, Windows, and Linux.

Step 3: After complete downloading, you can now connect your Android device with a PC using a USB cable or Micro-USB.

Step 4: After a successful connection, you can now open the “Vysor” app on your Android device to check the basic setup. During the basic setup procedure, you need to turn on the “USB debugging” option. You can find it in the “Developers Options” for the proper working of the Vysor app.

Step 5: You need to allow USB debugging for your PC after opening Vysor. You just have to select “Ok” from the box that appears on the screen of your Android device.

Step 6: You can now see your Android device name on your PC on the Vysor app. You just need to click on the “View” option to see your Android device.

3.2 Control Android Screen Using ApowerMirror

ApowerMirror counts as one of the best screen mirroring applications among all the others. This app mainly applies the mainstream mirroring technology that is the reason for its ultimate mirroring experience. You are required to follow some steps that are listed below to cast Android screen to PC via ApowerMirror:

Step 1: Open your Android device “Settings” app and scroll down at the bottom of the page to see the settings of “Developer options.” Now further check the option of “USB debugging” and turn it on.

Step 2: In this step, you need to download ApowerMirror on your PC and install its setup. Now open the app from the Desktop.

Step 3: Now, use a USB cable to connect your Android device with your PC. After that, check the notification that appears on your Android device. Begin the mirroring process by clicking on the “Start Now” option in that notification.

Step 4: At last, you can now entertain yourself on a much bigger screen by controlling your Android device.

Final Words

This article covers everything about screen mirroring and its working with the need to cast Android screen to PC. We have discussed the concept of screen mirroring both by wired or wireless connection. With the help of this article, you can now share your Android screen on a laptop or PC and can share data like documents, images, games, etc.

Furthermore, Wondershare introduces us to software like MirrorGo. It helps us to build a wireless connection between devices that we want to connect for screen mirroring purposes.

Also read: