How Can Realme GT 5Mirror Share to PC?

It usually happens with you during an office presentation or a task where you encounter with such an important video or detail that you find effective to be discussed or shown among your colleagues. At such stages, there are no properly designed cheap tools available that would help you cast the screen from your phone onto a bigger screen, allowing people to have a good look over the screen and develop their analysis out of it. Screen Mirroring has provided an ultimate solution to such needs and presented impressive and simple platforms that would allow you to mirror your device onto a bigger screen. Realme GT 5phones are counted among the most commonly used Android devices where people have complained about the availability of the screen sharing feature for displaying its screen onto massive ones for people to have a wider view of the objectives presented. This article discusses different mechanisms that allow you to mirror Realme GT 5to PC through a variety of methods involving different functions of the phone.

Part 1: Realme GT 5Mirror Share to PC using Realme GT 5’s Multi-Screen

Realme GT 5has recognized the significance of the feature and has devised its mechanism by providing the screen mirroring capability on its phone. This built-in feature makes it quite easier for you to share Realme GT 5’s screen to PC. The mirroring feature offered by Realme GT 5can be countered in a few easy steps that are quite not strenuous to understand. To get ahold of Realme GT 5’s mirror sharing feature to PC, follow the steps provided below.

Step 1: Open Connections from Computer

It is necessary to have your devices attached for screen mirroring through a single Wi-Fi connection. After connecting your PC and Realme GT 5using the same Wi-Fi source, access the Notification Center of your PC by tapping on the bottom right button to lead to a new screen. Tap on “Connect” from the list of options under the Collapse section.

Step 2: Access Your Realme GT 5

Following this, you need to select the option of mirroring Realme GT 5screen to PC by accessing the Notification bar from the top of the phone. From the series of a different prompt button, you need to select “Wireless Projection” to mirror Realme GT 5to PC.

Step 3: Selecting the Computer

A new window opens on the front of the screen. It will consist of the Realme GT 5 devices that are available on the same Wi-Fi connection to get shared. After selecting the appropriate computer, you can conclude the procedure since anything opened on the screen can now be observed on the PC as well.

Part 2: MirrorGo: The Best Mirroring Application

If you are up for searching other options to mirror share Realme GT 5to PC, there are many other platforms that may provide you effective mirroring services. However, while understanding the saturation that exists in the market, this article intends to provide you with a perfect platform for mirror sharing your Realme GT 5to PC with ease.

Wondershare Dr.Fone offers the best results with HD resolution for a better experience over a big screen. This application intends to develop a controlled environment over the computer for the user, as compared to other platforms that desperately fail to offer a controlled foundation in screen mirroring. MirrorGo looks over a vast window of practical applications, for which it consists of tools that have a use apart from screen mirroring. MirrorGo offers you to record your mirrored device screen, take a screenshot of an important frame, or even have it shared across different viewing platforms. This platform seeks to induce a better approach to mirroring your Realme GT 5to PC as compared to the other software existing in the market. To understand the simple guide on how to efficiently utilize the platform, you need to look over the steps adjourned below.

Wondershare Dr.Fone

Mirror your Realme GT 5 deviceto your computer!

• Share Realme GT 5screen to computer.
• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.
• Share secret moves and teach next level play.

4,227,666 people have downloaded it

Step 1: Connecting your PC

It is important to have your PC attached to the specific Realme GT 5device that you wish to mirror onto it. For this, you can consume a USB cable to successfully establish a connection.

Step 2: Accessing Settings

Following this, you need to access the settings of you Realme GT 5to open the “System & Updates” section. Click on the “Developer Options”. Then enable USB Debugging with the toggle available on the window.

Step 3: Mirror your Device

After successfully enabling USB Debugging, a pop-up appears on the Realme GT 5device, asking for an establishment of a mirroring environment. Tap “Ok” to successfully mirror your device across the PC.

Part 3: Realme GT 5Mirror Share to PC wirelessly via AllCast

Mirroring Android Devices has been made easier with a very definitive and expansive device of AllCast where you can share your Realme GT 5screen to PC by following a few steps, as stated below.

Step 1: Download Applications on both devices

You need to have the AllCast application on both your PC and Realme GT 5phones for connecting them, and mirrors share your screen to the PC.

Step 2: Open Computer Receiver

After ensuring that the PC, as well as the mobile phone, are connected over the same Wi-Fi device, you need to initiate the process by opening the AllCast Receiver through the Chrome Application Launcher.

Step 3: Initiate Mirror Share

After getting the appropriate settings on the computer, you need to propagate towards the phone. Initiate ‘Screen Recording and Mirror’ on the Realme GT 5.

Step 4: Synchronize Devices

In the options presented by “Screen Recording and Mirror,” you need to access the “Network Devices” and select the appropriate desktop model. Selecting the model will start screen sharing with ‘Chrome @’ followed by the IP Address of the computer. This allows you to mirror your Realme GT 5screen to PC wirelessly through AllCast without difficulty.

Conclusion

This article has introduced several screens mirroring platforms that can be used to mirror share Realme GT 5to PC. The perfect adoption of such issues will surely lead you to understand the system more appropriately and develop a ground where you present an effective change through this function.

How to Cast Realme GT 5 to Computer for iPhone and Android?

Screen Mirroring is a very common feature that is being adopted by many users as a cheap alternative to big, large screens. People have been managing to mirror their smartphone onto the screen of their PCs for viewing the content present on their phone with more detailing and precision. At times, people find the need to enjoy the contents present on their phones with their family, leading to the requirement of bigger screens. This article discusses various screencasting software providing the services to cast your Android or iPhones to PC that would help you in deciding what and how to use a specific software effortlessly.

When you can’t mirror phone to computer, view the guide of how to mirror Android to PC and how to mirror iPhone to PC.

Part 1: Cast Contents of iPhone and Android to Computer with MirrorGo

Sometimes the smaller Android or iPhone screen isn’t enough to accurately manage the app or files available on the Realme GT 5 device. Under such circumstances, the best solution is to cast Realme GT 5 to PC using a mirroring application.

Wondershare Dr.Fone is the safest option to perform such an activity, no matter the phone’s platform is Android or iOS. The app offers you to display your phone’s games, videos, and similar files to the much larger computer screen, where it is easy to complete the task at hand.

Step 1: Download MirrorGo and Connect the Phone with PC

MirrorGo is available for Windows PC. Download the application and launch it on the Realme GT 5 device. You will need to connect the Android phone with a USB cable. On the other hand, the iOS device needs to be connected to the same Wi-Fi network as the PC.

Step 2: Log in with Same credentials

To enable casting with an Android device, you need to tap on the Developer Option 7 times under the About Phone button. After that, navigate to Additional Settings, where you need to toggle-on USB Debugging.

If you are using an iPhone, simply locate the Screen Mirroring option. After the scan, tap on MirrorGo before proceeding to Step 3.

Step 3: Cast the Phone to Computer

Lastly, reaccess MirrorGo from the computer, and you’ll see the screen of the connected Android or iOS device.

Part 2: How to Cast Realme GT 5 to PC with AirDroid?

If we get started on the list of mirroring software that provides explicit services to its users, AirDroid can be considered as a frontline software for Android users for mirroring their screen on PC wirelessly. AirDroid provides a detailed feature set in the form of file transfer options, controlling your phone via computer and screen mirroring your phone to the PC with convenience. AirDroid is available for its users in the form of a desktop app and website. If you look forward to efficiently consume the platform in the form of the desktop application, you need to follow the step-by-step guide as provided below to control your Android phone from PC successfully.

Step 1: Download Application on both devices

Before using the services of the application, it is significant to install the desktop application from their official website and download the mobile application onto your Android phone through Google Play Store.

Step 2: Log in with Same credentials

For effectively mirroring your phone onto the PC screen, you are required to log in both platforms with the same username.

Step 3: Access the Appropriate Option

Select the “Screen Mirroring” button present on the window after you access the “Remote Control” tab on the sidebar of the platform. The screen is now mirrored onto the PC and can be viewed with ease.

Part 3: How to Cast Realme GT 5 to PC by Reflector 3?

Reflector 3 is another appreciable platform that provides you with screening services for both the Android and iPhone users. While understanding the basic differences in approaching the right options to cast your phone to PC, this article states the guideline for utilizing the services of Reflector 3 for both Android and iPhone separately.

For Android Users

Step 1: Download and Install

You need to download and install the application on your devices and have them connected to the same internet service provider. Launch the application to initiate the process.

Step 2: Open Settings on Phone

Following this, turn on your phone and slide down the finger to open the Quick settings section.

Step 3: Select the Casting Options

You need to turn on the casting option on the phone, which is either available under the name of Cast or Smart View.

Step 4: Select the Computer

A screen will open in front of you, consisting of the list of devices that can be wireless receivers of your screen. Tap the appropriate option to cast your phone onto the screen.

For iOS Users

Conversely, it is important to understand that with similar outcomes, there are different patterns of steps that are to be followed to screen your iPhone with the PC. For that, take a look at the guide provided as follows.

Step 1: Download and Launch

Download the software on both devices. Following, you need to confirm whether they are connected over the same internet connection. Then you can launch the program.

Step 2: Access Control Center

Now using your iPhone, swipe up to open the Control Center. Select the option of Screen Mirroring.

Step 3: Select the Appropriate Screen

With a list of Airplay-enabled receivers on the front, you have to tap on the right option to conclude the procedure of streaming or screening video from the phone to the computer.

Part 4: How to Cast Realme GT 5 to Computer by LetsView?

LetsView is another compelling and attractive platform that provides you the state-of-the-art environment for screen mirroring your phone to computer. This platform is available both on Google Play Store and App Store, making it an easy option for any kind of smartphone users.

For Android

To understand the method of screening your Android phone onto a PC screen, you need to follow the step-by-step guide provided below.

Step 1: Download and Launch

Ensure that the applications are downloaded on both applications, and both devices are connected with the same Wi-Fi.

Step 2: Detect your PC

While using LetsView on your phone, you need to detect your PC where you wish to mirror your screen and select it.

Step 3: Select the Appropriate Option

You’ll be led to another screen containing two options to select from. Since our objective is to mirror the screen of our Android phone to the computer, you need to select the option stating, Phone Screen Mirroring.

For iOS

Step 1: Download and Connect

You need to download the applications on both devices. Along with that, you need to make sure that both devices have the same internet connections.

Step 2: Open Application and Detect PC

Following this, open the LetsView application on your iPhone and detect the PC by tapping on the “Redetect” button. Tap on the appropriate computer name.

Step 3: Mirror your Phone

This opens up another screen where you need to select the option quoting Phone Screen Mirroring to connect the phone to the computer screen.

Part 5: How to Mirror Phone to Computer with Dr.Fone Air

While you have looked into some great solutions to cast your phone to a PC, there is another tool that provides a similar experience in mirroring the screen of your phone onto a computer screen. Wondershare Dr.Fone Air is a great online tool designed for mirroring the phone’s screen onto the computer for free. While it is a quick solution to work with, Wondershare Dr.Fone Air features some great functionalities which make it a unique tool:

• You can easily adjust the mirrored screen by zooming in and out, taking screenshots, and rotating it.
• You are not required to use Bluetooth and NFC for connecting devices in the process.
• It is a simple and quick process to screen mirror devices onto another screen.

Screen Casting vs. Screen Mirroring: What’s the Difference?

You might have heard of screencasting and screen mirroring together many times. It may come as a surprise to you that these two terminologies hold considerable differences from each other. To simplify the difference, screencasting is performed with the motive of displaying the content of the screen on another output display in the same room.

For screen mirroring, you display the content of the screen on another display while showing all the movements of the screen. Screen mirroring gives you the leverage to use the smartphone without any interruption.

How to Use Dr.Fone Air to Mirror Phone to Computer

If you are looking forward to mirroring your phone screen to a PC using Dr.Fone Air, you must use the following steps:

Step 1: Access the Dr.Fone Air Tool

Open the official website of Wondershare Dr.Fone Air and proceed to connect your phone and PC to the same Wi-Fi connection.

Step 2: Choose the Option for Connecting

As you connect these devices, proceed to install Dr.Fone Link on your phone. Once done, you will have to use the QR code or cast code displayed on the browser screen on your computer.

Step 3: Screen Mirrored Successfully

This will successfully execute the process and mirror the screen of your phone with the computer.

Conclusion

This article has provided a diversity of solutions for screencasting your phone to the computer. With the help of these solutions, you can quickly cast your phone to a PC without making it difficult for you. However, if you wish to have a better experience with screen mirroring your phone to a PC, you can consider using Wondershare Dr.Fone Air for effective results. This online solution won’t disappoint in providing a proper screen mirroring solution for your phone.

Recommended Best Applications for Mirroring Your Realme GT 5 Screen

Smartphones are much more advanced now, allowing users to stream types of content in high-definition easily. However, regardless of your phone type, the screen will seem too small for multiple people to see their content together. Using a mobile screen mirroring app can help there.

For example, you are watching a movie on your phone with friends, but no stand is available for phone rest, and the screen is too small. You can use a capable share screen app Android feature to mirror the screen on another device from a smartphone. Read to learn how.

Best Apps for Mirroring Screens in Android Smartphones

Before discussing the methods in detail, let us briefly look at the different types of mirroring methods you can trust in this regard.

	Mirror and Control	Easy of Use	Pricing
Dr.Fone Air - Online Screen Mirror	Yes	High	Free
Screen Stream Mirroring	Yes	High	Free with in-app purchases
LetsView	Yes	Medium	Free
Pushbullet	Yes, with limitations	Medium	Free
Pro- USD 4.99 (monthly) or USD 39.99 (yearly)
TeamViewer	Yes, with limitations	Medium	Premium- USD 37.88/month
Corporate- USD 80.67/month
Vysor	Yes	High	Starts at USD 2.50
AirDroid Cast	Yes	High	Free
Remote Casting- USD 2.49/month
Cast & Control- USD 3.49/month
Cubetto	Yes, with limitations	Medium	USD 20.17
Unified Remote	Yes	High	Starts at USD 1.82
Roku	Yes	High	Starts at USD 29.99
Mobizen	Yes	High	Free
Standard- USD 12/month
MirrorGo	Yes	High	Starts at USD 19.95

Let’s get more in-depth on the different solutions available for choosing the best screen- sharing app for Android.

1. Dr.Fone Air - Online Screen Mirror

One efficient and user-friendly screen-mirroring app for Android and iPhone devices is the Wondershare Dr.Fone Air software. The app helps share screens from your mobile device and control how to view the content on the screen. Activating the function is not complex either here.

Price: Free

Pros:

• Completely share screens across different platforms easily.
• Control how to view content on the computer screen, like rotating, zooming in and out, etc.
• Quick, effortless mirroring process.

Cons:

• One cannot directly activate it through scanning.

How does it work?

1. Visit the Fone Air official website on the computer. Launch the Dr.Fone Link app and connect your phone and computer using one WiFi network.
2. Use the Dr.Fone Link app to scan the QR Code or enter the Cast Code to connect both devices.
3. Screen mirroring will be when the two devices connect.

2. Screen Stream Mirroring

Use this screen mirroring app for Android mobile users to smoothly mirror the screen using tools and media players like XBMC/KODI, VLC, and more. The Screen Stream Mirroring Android app is efficient for browser-to-device screen sharing and broadcasting content easily across platforms. Also, get an on-screen stopper and timer to use while streaming.

Price: Free with in-app purchases.

Pros:

• Get the widget of the camera overlay during the streaming process.
• Easily screens share using web browsers.
• Possible to broadcast entertainment and game streams.

Cons:

• If you did not root the Realme GT 5 device, a startup tool is needed for screen mirroring.
• Time limits are available for free plan users.

How does it work?

1. Download the app. If no rooting has been done, activate the startup tool.
2. Follow-on screen steps and then run it. Please switch off the Realme GT 5 device and restart it again.
3. The screen mirroring will activate.

3. LetsView

One of the best tools for Android users for a safe and effective screen mirroring process is the LetsView app. With this tool, one can easily screencast their phone content on external screens, like computers and television. Unlike some other options, you can do that without USB plugging here and activate via QR code scanning/PIN code.

Price: Free

Pros:

• Quick mirroring process.
• Works to cast Android screens on different branded television devices.
• Use one WiFi network to sync the Realme GT 5 devices.

Cons:

• It does not work offline.
• Lagging issues can occur midway.

How does it work?

1. Connect all devices to one WiFi network.
2. Access the LetsView app. Find the Realme GT 5 device to mirror.
3. Choose the Realme GT 5 device name that appears as “LetsView + device-name”. Upon selection, the mirroring process will occur successfully.

4. Pushbullet

For easy phone screen sharing and mirroring usage, you can trust the Pushbullet software. The app allows smooth Android phone screencasting support to users and is simple to use for mirroring full-screen notifications, messages, and more.

Price: Free, Pro- USD 4.99 (monthly) pr USD 39.99 (yearly)

Pros:

• Easily use this to share links and media files.
• Chat with different users on mirrored screens on other devices.
• Get notifications regarding calls, texts, emails, etc.

Cons:

• The file-sending limit is capped at 25 MB.
• Action support for mirrored notifications is not supported for Free plan users.

How does it work?

1. Download the app on your phone and activate it after registering with your account.
2. Then, download the app on the desktop. Sign in when prompted.
3. Link other devices and begin using the features.

5. TeamViewer

TeamViewer is another useful screen mirroring app for Android for improved management and control of professional processes from any device. With this effect, you can access different apps and files on mobile devices and computers, especially with screencasting functionality.

Price: Premium- USD 37.88/month, Corporate- USD 80.67/month

Pros:

• Strong 256-bit AES encryption is available.
• Works on different devices.
• No installation or registration is necessary.

Cons:

• Mainly useful for professional teams only, so features are suitable for a niche group of users.
• Mass deployment (MSI) is only available for Corporate plan users.

How does it work?

1. Download and install the app on your computer and access the TeamViewer QuickSupport app on your phone. Get the displayed unique ID.
2. Go to Start on Windows and launch the TeamViewer app.
3. Add the unique ID > Connect to Partner > Allow.
4. Tap on Start Now next.

6. Vysor

The following Android screen share app that we recommend is Vysor. The app is simple to navigate and comes with multi-platform compatibility support. You can choose which content to cast on the bigger screen through your Android phone and use a QR code/USB to connect and stream effortlessly.

Price: In-app purchase with cost starting at USD 2.50 per month.

Pros:

• Easily take screenshots of screened control.
• Activate and control your mirrored Android phone screen.
• Vysor Pro users get a variety of features, like full-screen support.

Cons:

• Free users do not get wireless support.
• Drag and drop functionality is not allowed for free plan users.

How does it work?

1. Download the app on both mobile devices and computers separately and launch them.
2. Use a USB Type C cable to connect both devices.
3. Complete USB debugging processes via your browser by allowing Vysor access to it.
4. Then, control the screen mirroring effect.

7. AirDroid Cast

With AirDroid Cast, users can experience a high-quality screencasting experience from different phones or websites. Choose which channels and content you will have the chance to mirror on other screens easily. Various plans are available catering to different user needs.

Price: Free, Remote Casting- USD 2.49/month, Cast & Control- USD 3.49/month

Pros:

• Get two-way audio support.
• Quickly cast across different screens and devices.
• Use wireless cross-platform streaming functionality.

Cons:

• Only the Cast + Control plan version allows users the ability to control the cast Android screens.
• You can sync only one device with the Free plan.

How does it work?

1. Download software on devices.
2. Add the Cast code, Scan the QR code, or work with a USB cable to connect the two devices.
3. The mirroring will activate on the second screen.

8. Cubetto

This app allows you to create and manage different diagram models and flowcharts for meetings. You will get auto-layout set up for all the diagrams you don’t have to handle manually. Prepare your models in different languages, and mirror them to varying devices.

Price: USD 20.17

Pros:

• Host meetings via screen mirroring on tablets and phones.
• Prepare and add customized attributes for all object types.
• Prepare project and diagram copies.

Cons:

• Valid for a niche group of users only.
• You cannot use this for personal content mirroring needs.

How does it work?

1. Download, install, and launch the app on an Android phone.
2. Use features available to monitor the auto-created flowcharts and diagrams.
3. Export finished files in the supported formats or share them on other platforms via screen mirroring.

9. Unified Remote

Unified Remote is one of the best screen share apps for Android users to try out. After activating this feature on your computer, you can mirror what’s in view on mobile devices. The mouse support here allows users to utilize the multi-touch or single-touch functionality for more accessible controls.

Price: In-app cost starts at USD 1.82.

Pros:

• Control different types of devices with varying remote devices.
• Easily control various media sources, like Netflix, iTunes, Spotify, etc.
• Simple screen mirroring process between computers and mobile phones.

Cons:

• You must invest in additional solutions for the mirroring process since it only works via a local network.
• Unable to control another Android phone from the first one.

How does it work?

1. Download and activate the app on your mobile device.
2. Install the Unified Remote Server on your computer.
3. Connect to the server from your app on an Android phone via Bluetooth or WiFi. Screen mirroring will begin.

10. Roku

With this app, you can basically work it for streaming games and media from different apps and platforms. Choose between the various available channels, select the main content you wish to cast to another device, and continue using the tools available to control your actions.

Price: Starting at USD 29.99.

Pros:

• Stream different types of channels from global network providers and channels.
• Many languages are supported.
• Control and monitor your account and settings through the app.

Cons:

• You need to invest in additional devices.
• Slightly tricky for total beginners to handle at first.

How does it work?

1. Power your Roku device up.
2. Connect the Realme GT 5 device to the active network connection you are using.
3. Register for a Roku account. Then, activate the connection and begin screencasting on another device.

11. Mobizen

With Mobizen, it is straightforward to do quick and high-quality live broadcasts from a computer or mobile phone. You can mirror your videos through the Android device easily after activating this app.

Plus, for users creating game content to stream, this app helps do that. Connect to other significant sites like Twitch and YouTube for broadcast sharing and easily mirror your screen.

Price: Free, Standard- USD 12/month

Pros:

• Prepare broadcasts in real-time with many features for pre-production streaming.
• You can invite more participants easily for partnered podcasts.
• Add custom logos.

Cons:

• Limited types of content to edit and stream.
• QHD (2k) broadcasting is only available for paid plan users.

How does it work?

1. Activate the Mobizen recorder function while playing a mobile game and record it.
2. Download the file to the computer.
3. Then, log in to the Mobizen site and prepare a scene with the recording.
4. Live broadcast it to another platform.

12. MirrorGo

This particular mobile screen mirroring app for Android allows its users to easily mirror their Android phone to the computer screen via a WiFi connection. It is possible to record the Android phone and portray that across devices with MirrorGo. Plus, you can easily capture screenshots, transfer files, and more.

Price: Monthly- USD 19.95; Quarterly- USD 9.98/month; Annual- USD 3.33/month

Pros:

• High-quality screen capturing function in HD.
• You can easily sync your game data across platforms.
• Quickly recording the videos while streaming.

Cons:

• Not available for free.
• Only usable on 5 different devices per license.

How does it work?

1. Sync the Android phone with your computer.
2. Activate the USB debugging process on the mobile.
3. Enable the mirroring process, and the screen will be cast on your computer quickly.

Conclusion

Indeed, all of the options mentioned in this list are commendable choices for screen mirroring. While each provides practical benefits and comes with some drawbacks, they are helpful to a specific group of users.

Different types of users can benefit from Dr.Fone Air - Online Screen Mirror, which makes it a suitable choice overall. However, consider their usability and functions before making your final decision.

Also read: