How Can Tecno Pop 8Mirror Share to PC?

It usually happens with you during an office presentation or a task where you encounter with such an important video or detail that you find effective to be discussed or shown among your colleagues. At such stages, there are no properly designed cheap tools available that would help you cast the screen from your phone onto a bigger screen, allowing people to have a good look over the screen and develop their analysis out of it. Screen Mirroring has provided an ultimate solution to such needs and presented impressive and simple platforms that would allow you to mirror your device onto a bigger screen. Tecno Pop 8phones are counted among the most commonly used Android devices where people have complained about the availability of the screen sharing feature for displaying its screen onto massive ones for people to have a wider view of the objectives presented. This article discusses different mechanisms that allow you to mirror Tecno Pop 8to PC through a variety of methods involving different functions of the phone.

Part 1: Tecno Pop 8Mirror Share to PC using Tecno Pop 8’s Multi-Screen

Tecno Pop 8has recognized the significance of the feature and has devised its mechanism by providing the screen mirroring capability on its phone. This built-in feature makes it quite easier for you to share Tecno Pop 8’s screen to PC. The mirroring feature offered by Tecno Pop 8can be countered in a few easy steps that are quite not strenuous to understand. To get ahold of Tecno Pop 8’s mirror sharing feature to PC, follow the steps provided below.

Step 1: Open Connections from Computer

It is necessary to have your devices attached for screen mirroring through a single Wi-Fi connection. After connecting your PC and Tecno Pop 8using the same Wi-Fi source, access the Notification Center of your PC by tapping on the bottom right button to lead to a new screen. Tap on “Connect” from the list of options under the Collapse section.

Step 2: Access Your Tecno Pop 8

Following this, you need to select the option of mirroring Tecno Pop 8screen to PC by accessing the Notification bar from the top of the phone. From the series of a different prompt button, you need to select “Wireless Projection” to mirror Tecno Pop 8to PC.

Step 3: Selecting the Computer

A new window opens on the front of the screen. It will consist of the Tecno Pop 8 devices that are available on the same Wi-Fi connection to get shared. After selecting the appropriate computer, you can conclude the procedure since anything opened on the screen can now be observed on the PC as well.

Part 2: MirrorGo: The Best Mirroring Application

If you are up for searching other options to mirror share Tecno Pop 8to PC, there are many other platforms that may provide you effective mirroring services. However, while understanding the saturation that exists in the market, this article intends to provide you with a perfect platform for mirror sharing your Tecno Pop 8to PC with ease.

Wondershare Dr.Fone offers the best results with HD resolution for a better experience over a big screen. This application intends to develop a controlled environment over the computer for the user, as compared to other platforms that desperately fail to offer a controlled foundation in screen mirroring. MirrorGo looks over a vast window of practical applications, for which it consists of tools that have a use apart from screen mirroring. MirrorGo offers you to record your mirrored device screen, take a screenshot of an important frame, or even have it shared across different viewing platforms. This platform seeks to induce a better approach to mirroring your Tecno Pop 8to PC as compared to the other software existing in the market. To understand the simple guide on how to efficiently utilize the platform, you need to look over the steps adjourned below.

Wondershare Dr.Fone

Mirror your Tecno Pop 8 deviceto your computer!

• Share Tecno Pop 8screen to computer.
• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.
• Share secret moves and teach next level play.

4,227,666 people have downloaded it

Step 1: Connecting your PC

It is important to have your PC attached to the specific Tecno Pop 8device that you wish to mirror onto it. For this, you can consume a USB cable to successfully establish a connection.

Step 2: Accessing Settings

Following this, you need to access the settings of you Tecno Pop 8to open the “System & Updates” section. Click on the “Developer Options”. Then enable USB Debugging with the toggle available on the window.

Step 3: Mirror your Device

After successfully enabling USB Debugging, a pop-up appears on the Tecno Pop 8device, asking for an establishment of a mirroring environment. Tap “Ok” to successfully mirror your device across the PC.

Part 3: Tecno Pop 8Mirror Share to PC wirelessly via AllCast

Mirroring Android Devices has been made easier with a very definitive and expansive device of AllCast where you can share your Tecno Pop 8screen to PC by following a few steps, as stated below.

Step 1: Download Applications on both devices

You need to have the AllCast application on both your PC and Tecno Pop 8phones for connecting them, and mirrors share your screen to the PC.

Step 2: Open Computer Receiver

After ensuring that the PC, as well as the mobile phone, are connected over the same Wi-Fi device, you need to initiate the process by opening the AllCast Receiver through the Chrome Application Launcher.

Step 3: Initiate Mirror Share

After getting the appropriate settings on the computer, you need to propagate towards the phone. Initiate ‘Screen Recording and Mirror’ on the Tecno Pop 8.

Step 4: Synchronize Devices

In the options presented by “Screen Recording and Mirror,” you need to access the “Network Devices” and select the appropriate desktop model. Selecting the model will start screen sharing with ‘Chrome @’ followed by the IP Address of the computer. This allows you to mirror your Tecno Pop 8screen to PC wirelessly through AllCast without difficulty.

Conclusion

This article has introduced several screens mirroring platforms that can be used to mirror share Tecno Pop 8to PC. The perfect adoption of such issues will surely lead you to understand the system more appropriately and develop a ground where you present an effective change through this function.

How to Cast Tecno Pop 8 to Computer for iPhone and Android?

Screen Mirroring is a very common feature that is being adopted by many users as a cheap alternative to big, large screens. People have been managing to mirror their smartphone onto the screen of their PCs for viewing the content present on their phone with more detailing and precision. At times, people find the need to enjoy the contents present on their phones with their family, leading to the requirement of bigger screens. This article discusses various screencasting software providing the services to cast your Android or iPhones to PC that would help you in deciding what and how to use a specific software effortlessly.

When you can’t mirror phone to computer, view the guide of how to mirror Android to PC and how to mirror iPhone to PC.

Part 1: Cast Contents of iPhone and Android to Computer with MirrorGo

Sometimes the smaller Android or iPhone screen isn’t enough to accurately manage the app or files available on the Tecno Pop 8 device. Under such circumstances, the best solution is to cast Tecno Pop 8 to PC using a mirroring application.

Wondershare Dr.Fone is the safest option to perform such an activity, no matter the phone’s platform is Android or iOS. The app offers you to display your phone’s games, videos, and similar files to the much larger computer screen, where it is easy to complete the task at hand.

Step 1: Download MirrorGo and Connect the Phone with PC

MirrorGo is available for Windows PC. Download the application and launch it on the Tecno Pop 8 device. You will need to connect the Android phone with a USB cable. On the other hand, the iOS device needs to be connected to the same Wi-Fi network as the PC.

Step 2: Log in with Same credentials

To enable casting with an Android device, you need to tap on the Developer Option 7 times under the About Phone button. After that, navigate to Additional Settings, where you need to toggle-on USB Debugging.

If you are using an iPhone, simply locate the Screen Mirroring option. After the scan, tap on MirrorGo before proceeding to Step 3.

Step 3: Cast the Phone to Computer

Lastly, reaccess MirrorGo from the computer, and you’ll see the screen of the connected Android or iOS device.

Part 2: How to Cast Tecno Pop 8 to PC with AirDroid?

If we get started on the list of mirroring software that provides explicit services to its users, AirDroid can be considered as a frontline software for Android users for mirroring their screen on PC wirelessly. AirDroid provides a detailed feature set in the form of file transfer options, controlling your phone via computer and screen mirroring your phone to the PC with convenience. AirDroid is available for its users in the form of a desktop app and website. If you look forward to efficiently consume the platform in the form of the desktop application, you need to follow the step-by-step guide as provided below to control your Android phone from PC successfully.

Step 1: Download Application on both devices

Before using the services of the application, it is significant to install the desktop application from their official website and download the mobile application onto your Android phone through Google Play Store.

Step 2: Log in with Same credentials

For effectively mirroring your phone onto the PC screen, you are required to log in both platforms with the same username.

Step 3: Access the Appropriate Option

Select the “Screen Mirroring” button present on the window after you access the “Remote Control” tab on the sidebar of the platform. The screen is now mirrored onto the PC and can be viewed with ease.

Part 3: How to Cast Tecno Pop 8 to PC by Reflector 3?

Reflector 3 is another appreciable platform that provides you with screening services for both the Android and iPhone users. While understanding the basic differences in approaching the right options to cast your phone to PC, this article states the guideline for utilizing the services of Reflector 3 for both Android and iPhone separately.

For Android Users

Step 1: Download and Install

You need to download and install the application on your devices and have them connected to the same internet service provider. Launch the application to initiate the process.

Step 2: Open Settings on Phone

Following this, turn on your phone and slide down the finger to open the Quick settings section.

Step 3: Select the Casting Options

You need to turn on the casting option on the phone, which is either available under the name of Cast or Smart View.

Step 4: Select the Computer

A screen will open in front of you, consisting of the list of devices that can be wireless receivers of your screen. Tap the appropriate option to cast your phone onto the screen.

For iOS Users

Conversely, it is important to understand that with similar outcomes, there are different patterns of steps that are to be followed to screen your iPhone with the PC. For that, take a look at the guide provided as follows.

Step 1: Download and Launch

Download the software on both devices. Following, you need to confirm whether they are connected over the same internet connection. Then you can launch the program.

Step 2: Access Control Center

Now using your iPhone, swipe up to open the Control Center. Select the option of Screen Mirroring.

Step 3: Select the Appropriate Screen

With a list of Airplay-enabled receivers on the front, you have to tap on the right option to conclude the procedure of streaming or screening video from the phone to the computer.

Part 4: How to Cast Tecno Pop 8 to Computer by LetsView?

LetsView is another compelling and attractive platform that provides you the state-of-the-art environment for screen mirroring your phone to computer. This platform is available both on Google Play Store and App Store, making it an easy option for any kind of smartphone users.

For Android

To understand the method of screening your Android phone onto a PC screen, you need to follow the step-by-step guide provided below.

Step 1: Download and Launch

Ensure that the applications are downloaded on both applications, and both devices are connected with the same Wi-Fi.

Step 2: Detect your PC

While using LetsView on your phone, you need to detect your PC where you wish to mirror your screen and select it.

Step 3: Select the Appropriate Option

You’ll be led to another screen containing two options to select from. Since our objective is to mirror the screen of our Android phone to the computer, you need to select the option stating, Phone Screen Mirroring.

For iOS

Step 1: Download and Connect

You need to download the applications on both devices. Along with that, you need to make sure that both devices have the same internet connections.

Step 2: Open Application and Detect PC

Following this, open the LetsView application on your iPhone and detect the PC by tapping on the “Redetect” button. Tap on the appropriate computer name.

Step 3: Mirror your Phone

This opens up another screen where you need to select the option quoting Phone Screen Mirroring to connect the phone to the computer screen.

Part 5: How to Mirror Phone to Computer with Dr.Fone Air

While you have looked into some great solutions to cast your phone to a PC, there is another tool that provides a similar experience in mirroring the screen of your phone onto a computer screen. Wondershare Dr.Fone Air is a great online tool designed for mirroring the phone’s screen onto the computer for free. While it is a quick solution to work with, Wondershare Dr.Fone Air features some great functionalities which make it a unique tool:

• You can easily adjust the mirrored screen by zooming in and out, taking screenshots, and rotating it.
• You are not required to use Bluetooth and NFC for connecting devices in the process.
• It is a simple and quick process to screen mirror devices onto another screen.

Screen Casting vs. Screen Mirroring: What’s the Difference?

You might have heard of screencasting and screen mirroring together many times. It may come as a surprise to you that these two terminologies hold considerable differences from each other. To simplify the difference, screencasting is performed with the motive of displaying the content of the screen on another output display in the same room.

For screen mirroring, you display the content of the screen on another display while showing all the movements of the screen. Screen mirroring gives you the leverage to use the smartphone without any interruption.

How to Use Dr.Fone Air to Mirror Phone to Computer

If you are looking forward to mirroring your phone screen to a PC using Dr.Fone Air, you must use the following steps:

Step 1: Access the Dr.Fone Air Tool

Open the official website of Wondershare Dr.Fone Air and proceed to connect your phone and PC to the same Wi-Fi connection.

Step 2: Choose the Option for Connecting

As you connect these devices, proceed to install Dr.Fone Link on your phone. Once done, you will have to use the QR code or cast code displayed on the browser screen on your computer.

Step 3: Screen Mirrored Successfully

This will successfully execute the process and mirror the screen of your phone with the computer.

Conclusion

This article has provided a diversity of solutions for screencasting your phone to the computer. With the help of these solutions, you can quickly cast your phone to a PC without making it difficult for you. However, if you wish to have a better experience with screen mirroring your phone to a PC, you can consider using Wondershare Dr.Fone Air for effective results. This online solution won’t disappoint in providing a proper screen mirroring solution for your phone.

Full Guide on Mirroring Your Tecno Pop 8 to Your PC/Mac

1.Why People Want to Mirror Their Android to PC?

The best thing about Android phones these days is that they are like mini computers in which you can save lots of things like photographs, videos, music, and even your important documents. Carrying a phone is very convenient as well, and you have the whole world gathered into a single device. But there are times when you need to show something important to other people on your phone and you need to connect it to your PC, especially if it is some important information which you collected from the internet, and want to show your family or colleagues. In situations like this mirroring, your Android to PC becomes really important as you don’t have to mail or send the data to everyone.

2. Ways in Which You Can Mirror Android to PC

There are many ways through which you can mirror Android to PC different apps are available for this purpose as well. You can mirror the Android to PC by using either your WiFi or your USB port. Both methods are practical and successful.

2.1 Mirror Android to PC with WiFi

2.1.1 MirrorOp Sender

MirrorOp Sender is a device that you can easily use for mirroring your Android with your PC by using your WiFi.

How Does MirrorOp Work:

MirrorOp is available on the PlayStore and can be downloaded easily. Before mirroring your Android with a PC, make sure that your Android is rooted.

• • Download MirrorOp Sender to your Android.
• • Download the windows version of the app called MirrorOp Receiver on your PC
• • Connect the Android and PC to a common WiFi network.
• • Run the MirrorOp Sender app on your PC.
• • Run the MirrorOp Receiver app on your Android.
• • Both the Tecno Pop 8 devices will search each other automatically.
• • You can now start mirroring.
• • You can control your Android device through a keyboard and mouse.

2.1.2 Miracast

Miracast is an application that is used for mirroring Android with PC via a WiFi connection.

• • After installing Miracast from the above-mentioned link on your Android device swipe from the right and select the Tecno Pop 8 devices option.
• • Select the Project option from there.
• • An “Add a wireless display” option will appear on your device from which you can select your WiFi connection.
• • From your PC, you can go to the Settings and click on the Tecno Pop 8 devices tab. By clicking on the “Add a device” option, you can search for the Miracast receiver.
• • From your device, go to Settings and from there to the Tecno Pop 8 device section and tap on Display. Select Cast Screen from there.
• • Select the Menu button and tap on Enable Wireless Display. Your device will now search for Miracast devices and display it under the Cast Screen option. Tap on the option and a notification that your screen is being cast will appear.

Now, you can easily mirror your Android with your PC.

2.2 Mirror Android to PC with USB

2.2.1 Android-Screen Monitor

For mirroring Android to PC via a USB, you must got JAVA installed on your PC. On the other hand, the Developer mode should be enabled on your Android device for the successful mirroring of the Tecno Pop 8 device.

Once your requirements are complete, you can download Android-Screen Monitor from https://code.google.com/p/android-screen-monitor/

• • Download and install JRE or Java Runtime Environment.
• • Install Android Software Development Kit (SDK) and the associated tools to your PC’s Program Folder.
• • Once it is installed run the application and select only Android SDK-Platform Tools.
• • Go to the Settings in your phone or Android device, select Developer Options, and from there go over to the USB Debugging option and enable it.

• • Look for the drivers associated with your Android device in Google and download it into a separate folder on your PC.
• • Now you can connect your Tecno Pop 8 to your computer through a USB
• • Open the Tecno Pop 8 device Manager and look for your Android device.
• • Now, it’s time to set an ADB path.
• • Open the Properties of your computer and click on the Advanced System Settings option. Select Environment Variables and look for “Path”.
• • Once found, click and save edit it to C:Program Files (x86)Androidandroid-SDK platform-tools
• • Save.

• • Now, download Android Screen Monitor and install it on your computer.
• • Now, your computer is mirrored with your android.

2.2.2 Droid@Screen

Droid@Screen is another popular application that is used to mirror Android to PC through a USB.

• • For using this app, you first need to download JAVA Run Time Application on your PC and install it.
• • Now, download the ADB tool by extracting it from your desktop.
• • Download Droid@Screen from the given link and run the application.
• • Now, click on ADB and select the ADB Executable Path.
• • Choose the ADB folder to which you had extracted it before and click OK.

• • In your Android device, open the Settings and go to the Developer Options.
• • Turn the Developer Options on and select the USB Debugging mode under it.
• • Connect your device to your PC after installing all the necessary drivers from the internet.
• • Your device has been mirrored to your PC.

3. Best Tool on How to Mirror Your Android to Your PC - Wondershare Dr.Fone

Although there are many different tools available on the internet that help you in mirroring your Android device with your PC, yet if you are looking for the best one, it is definitely MirrorGo (Android) . This app is a very easy and professional solution to all your mirroring problems. MirrorGo works on Windows 10, Windows 7, Windows 8, Windows Vista as well as on Windows XP. It is also compatible with iOS as well as Android.

Wondershare Dr.Fone (Android)

Mirror your Tecno Pop 8 deviceto your computer!

• Drag and drop files between your computer and phone directly.
• Send and receive messages using your computer`s keyboard including SMS, WhatsApp, Facebook, etc.
• View multiple notifications simultaneously without picking up your phone.
• Use android apps on your PC for a full-screen experience.
• Record your classic gameplay.
• Screen Capture at crucial points.

3,200,127 people have downloaded it

Step 1. Install Wodnershare MirrorGo on your PC.

Step 2. Connect your device with PC using MirrorGo:

• • Connect your device with your PC through the USB.

• • Select “Transfer files” mode in the “Use USB to” choice.

  

• • Go to the Developer option and enable the option of USB Debugging.

  

Your PC will automatically detect your device after USB debugging is enabled.

Step 3. Control your mobile after mirroring phone screen.

Once you have mirrored your Android device with your PC, you can do a lot of interesting things like:

• • Watch your favorite videos on the big screen.
• • Show your favorite photographs to your family and friends.
• • You can enjoy a better viewing experience because of the bigger screen size.
• • You can easily transfer the data between your PC and Android device.
• • You can play the games on your mobile through your PC.
• • You can use real-time software installed on your mobile through your PC.

Try It Free

4. Guide on How To Mirror Your Android Phone to Mac

So you don’t own a PC but are a proud owner of a Mac. Well, there is nothing to worry about as you can easily mirror your Android device to your Mac as well. Just like mirroring your PC and device can be done by the use of different available software, mirroring your device to Mac consists of many different options as well. after mirroring, you can enjoy different exciting experiences like using your Whatsapp on a bigger screen and playing Minecraft on your MAC.

The Best Way to Mirror Your Android to Mac

There are different ways through which you can mirror your Android device with your Mac. However, the best option which is available is AirDroid. With the help of AirDroid, you can easily control your device through your Mac ad can enjoy different exciting experiences.

How Does MirrorOp Work:

MirrorOp is available on the PlayStore and can be downloaded easily. Before mirroring your Android with a PC, make sure that your Android is rooted.

• • Install AirDroid on your system via https://play.google.com/store/apps/details?id=com.sand.airdroid&hl=en
• • Set up your AirDroid account by running the application.
• • AirDroid will now ask you for enabling its service. Tap on Enable for doing so. A Pop up will appear now, just tap on OK for the service.
• • Enable the Find My Tecno Pop 8 function by turning it on and tapping on the Activate option.
• • Another Android setting menu will appear on your device. Tap on Activate and your Mac and device will now become compatible with each other.
• • Now install the AirDroid app on your Mac and run the installation program. Launch the file after the installation is complete.
• • Enter the same login and password which you did in your AirDroid app on your device.
• • Now you can run the files on your device easily on your computer.

Also read: